Toyota Verso Mk2 Rear Door Window Glass Run Seal Gasket Left N/S 68152-0F020

Toyota Verso Mk2 Rear Door Window Glass Run Seal Gasket Left N/S is an original body component from the Window seals and trims category, designed for installation in the rear left door area. It ensures a tight fit for the window, limits the ingress of water and noise into the interior, and helps maintain the stable operation of the window regulator mechanism.

Specifications and technical data

• SKU: 681520F020
• Mark: Toyota
• Condition: Used
• OEM Part Number: 681520F020
• Substitutable numbers: 681520F020, 68152-0F020
• Location on the vehicle: Rear, Left
• Part type: Window Run Channel
• Category: Window Seals, Gaskets & Trims

Purpose and function of the window seal

The presented seal has been designed specifically for the rear left door window in the second-generation Toyota Verso model. Its task is to maintain proper sealing between the glass and the door frame, which translates into reduced wind noise, moisture penetration, and dirt ingress into the vehicle interior. A well-fitted seal contributes to:

• stable window guidance in the channels,
• reduced risk of window fogging from the inside,
• protection of the door interior against excessive moisture,
• acoustic comfort in the cabin when driving at higher speeds.

Compatibility and body fitment

The seal is intended for installation in the rear left part of the body, which guarantees a proper fit to the shape of the door frame and the window profile in the Toyota Verso Mk2. Thanks to the factory design, the appropriate geometry is maintained, allowing for correct interaction with the window regulator mechanism and other door components. Proper fitment of the component translates into:

• easier installation without the need for modifications,
• even pressure of the seal around the entire window perimeter,
• preservation of the factory body line and window edge aesthetics.

Characteristics of the used component

The offered seal comes from dismantling, which allows for maintaining the original fitment parameters characteristic of factory-installed parts. This type of component is a good choice for door service when the existing seal shows signs of wear, material hardening, or leaks. Choosing a used OEM component allows for:

• maintaining material consistency with other seals in the vehicle,
• preserving the original operating characteristics of the window,
• optimizing repair costs while maintaining proper functionality.

Importance of original OEM components

Window seals in Toyota vehicles are designed taking into account specific door frame shapes, assembly tolerances, and operating conditions. Using an original component from the same model line minimizes the risk of mismatch, which could result in noise, leaks, or difficult window operation. If you want to better understand why original components from dismantling are often a beneficial choice in terms of durability and safety, it is worth reading the article describing the importance of OEM parts: why used original OEM car parts are a safe and economical solution.

Expansion of the window area in Toyota Verso

If you are planning a comprehensive repair or modernization of the window area in your Toyota and need other elements from the same group, such as additional window seals, trim strips, or window profiles, check the available parts in the Toyota window seals and trims category. During service work on the body and doors, it is also worth paying attention to the condition of elements affecting tightness and operational safety. In the context of other vehicle components, where the purchase of used parts is often considered, the guide regarding the fuel system may be helpful: what to look for when choosing used components such as an injection pump or fuel rail.