Audi A6 C6 Rear Left N/S Suspension Leg Wheel Hub Brake Disc 2.0 TDI Quattro

Audi A6 C6 Rear Left N/S Suspension Leg Wheel Hub Brake Disc 2.0 TDI Quattro is a complete component from the Suspension replacement kits group, designed for installation on the rear axle on the driver's side. The original Audi design ensures proper geometry, handling stability, and consistency with the factory Quattro drivetrain.

Specifications and technical data

• SKU: 4F0505434G-2
• Mark: Audi
• Condition: Used
• OEM Part Number: 4F0505434G
• Substitutable numbers: 4F0505434G, 4F0 505 434 G, 4F0615404F, 4F0 615 404 F, 4F0615601E, 4F0 615 601 E
• Location on the vehicle: Rear, Left
• Category: Suspension Component Replacement Kits

Purpose and vehicle placement

The presented suspension assembly is designed for installation on the rear left side of the vehicle, in the zone responsible for transferring vertical and lateral loads and for wheel guidance in the multi-link system. The integration of the wheel hub with the load-bearing elements and the brake disc allows for maintaining proper alignment, which translates into predictable vehicle behavior during braking and dynamic maneuvers.

Technical and functional characteristics

The complete suspension assembly for Audi A6 C6 2.0 TDI Quattro combines key components responsible for wheel guidance and interaction with the braking system in one structure. Thanks to the factory design, compatibility with the manufacturer's standard solutions is maintained, which facilitates installation and subsequent maintenance.

• Proper fit for the rear axle geometry in the Quattro drive version.
• Integration of the wheel hub with the suspension carrier and brake disc.
• Stable load transfer when driving with a fully loaded vehicle.
• Possibility of use in repairs restoring factory handling parameters.

Benefits of using the original suspension assembly

Using an original Audi suspension assembly in a used condition allows for maintaining factory fitment to the body and drivetrain, without the need for structural modifications. This solution is particularly beneficial for post-accident repairs, replacement after wear and tear, or restoring the car to a state consistent with the manufacturer's technical documentation.

Compared to aftermarket replacements, the original element from the Suspension replacement kits group ensures material and structural consistency with other rear axle components, which reduces the risk of incorrect wheel alignment or accelerated tire wear.

Condition of the element and use in service practice

The product is offered as a used part, which represents a reasonable compromise between repair costs and maintaining the original Audi technical specification. This choice is often preferred in professional workshops specializing in the brand, where both compliance with documentation and the economics of vehicle maintenance are important.

A suspension assembly of this type is suitable for:

• repairs after mechanical damage to the rear left suspension,
• replacing elements after long-term operation,
• restoring full functionality of the running gear in an Audi A6 C6 2.0 TDI Quattro.

Expanding the scope of repairs and selecting related elements

If you are planning a comprehensive repair or upgrade of the rear axle suspension zone in your Audi and need other elements from the same group, such as additional arms, mounts, or complete axle modules, check the available parts in the Audi suspension replacement kits category.

When deciding on the scope of repair, it is also worth considering the strategy of selecting used mechanical elements in other vehicle systems. In the context of drivetrain and power transmission repairs, an article discussing when original used components are a beneficial alternative to remanufacturing may be helpful – more information can be found in the material Manual transmission failures in cars – why is an original used part a more sensible choice than remanufacturing?.