Ford Kuga Mk2 Tail Light Rear Side Lamp Wiring Cable Right O/S GV41-13404-DD

Ford Kuga Mk2 Tail Light Rear Side Lamp Wiring Cable Right O/S is an original electrical installation component designed to support the right rear lighting assembly. Thanks to its factory-spec connector geometry and precise fitment for the specific Ford model, it ensures a stable electrical connection and proper lamp operation without the need for any modifications to the wiring harness.

Specifications and technical data

• SKU: GV41-13404-DD-2
• Mark: Ford
• Condition: Used
• OEM Part Number: GV41-13404-DD
• Substitutable numbers: GV41-13404-DD, GV4113404DD
• Location on the vehicle: Rear, Right
• Part type: Wiring Pigtail
• Category: Sockets, Connectors & Wiring

Purpose and function in the vehicle

The wiring harness is designed for installation in the rear right part of the body, where it is responsible for power supply and signal transmission to the combination lamp. It includes the wires and connectors necessary for the operation of lighting functions, such as position lights, brake lights, or turn signals, in accordance with the factory configuration of the second-generation Ford Kuga. Its placement in the rear lamp area makes this component significant for the vehicle's safety and road visibility. A properly selected wiring harness minimizes the risk of installation errors, loose contacts, or improper lighting operation.

Construction and installation fitment

The harness belongs to the Wires, plugs, and connectors category, meaning it has been engineered for precise connection to the vehicle's factory sockets. The routing of the wires, the length of the sections, and the configuration of the plugs are adapted to the specific mounting location in the Ford Kuga Mk2, which facilitates service and reduces the time required for replacement. The plug-in solution within the rear lamp area allows for:

• direct connection to the original sockets in the bodywork,
• maintenance of the factory wire routing path,
• minimizing interference with the vehicle's main wiring harness.

Practical application and benefits of installation

Using an original wiring harness in the Ford Kuga Mk2 is particularly beneficial in cases of mechanical damage near the lamp, contact corrosion, or previous non-factory installation repairs. Replacing it with a dedicated component allows for restoring proper lighting operation without the need for custom wiring or soldering connectors. The main advantages of installation include:

• compatibility with the factory electrical system of the Ford,
• organized wire routing within the right rear lamp area,
• reduced risk of failures resulting from makeshift installation repairs.

Product characteristics and condition

The offered wiring harness is an original Ford component, sourced from dismantling. This type of component allows for maintaining consistency with the factory installation, which is important both from a diagnostic point of view and for subsequent service maintenance. A used OEM component is a solution that combines technical compliance with a cost-effective repair compared to new parts. Before installation, it is recommended to perform a standard inspection of the condition of the connectors and wire insulation to ensure long-term and trouble-free operation in the demanding conditions of the rear body area. If you are planning a comprehensive repair or upgrade of the rear lamp electrical installation area in your Ford and need other components from the same group, such as wires, plugs, or connectors, check the available parts in the Ford wires, plugs, and connectors category. For drivers interested in a broader approach to maintaining technical systems in the vehicle, including the selection of used components in other drivetrain areas, the guide article Clutch and dual-mass flywheel – diagnostics and selection of drivetrain parts may be helpful, as it demonstrates practical principles for assessing the condition of components and their proper selection.