Jaguar Xf X250 Front Vertical Link Hub Knuckle Front Right O/S C2Z3054

The Jaguar Xf X250 Front Vertical Link Hub Knuckle Front Right O/S is an original suspension system component from the Bearings, wheel hubs and bushings group, designed for installation on the front right side of the vehicle. It ensures precise wheel guidance, stable hub mounting, and correct suspension geometry, which translates into predictable vehicle handling and safe operation.

Specifications and technical data

• SKU: C2Z3054
• Mark: Jaguar
• Condition: Used
• OEM Part Number: C2Z3054
• Substitutable numbers: C2Z3054, C2P25453, 8W833K185CA, 8W83-3K185-CA, C2P25454, 8W833K186CA, 8W83-3K186-CA, 8X233K185AB, 8X23-3K185-AB
• Location on the vehicle: Front, Right
• Part type: Wheel Hub
• Category: Wheel Bearings, Hubs & Seals

Purpose and function in the suspension system

The front right steering knuckle in the Jaguar XF X250 is a key component connecting the wheel hub, suspension elements, and the steering system. It is responsible for:

• stable seating of the hub and wheel bearing,
• maintaining the correct camber and toe angles,
• transferring loads from the wheel to the suspension,
• precise wheel guidance during steering and braking. Thanks to the factory design tailored to the XF X250 body, the component ensures consistency with other suspension parts and predictable operation of the entire system.

Compatibility and replacement numbers

The offered steering knuckle comes from the Jaguar parts range and was designed specifically for the front axle on the right side. It has an assigned OEM part number and a set of interchangeable numbers, which facilitates the selection of the correct component when comparing it with the existing part in the vehicle or the manufacturer's catalog. The presence of reference numbers allows for the safe replacement of various factory variants with one compatible element.

Condition, origin, and advantages of using a used part

The presented steering knuckle is a used part, sourced from dismantling, which represents a reasonable compromise between cost and quality. Choosing an original second-hand component allows you to maintain factory fitment, geometry, and suspension performance characteristics, while reducing expenses compared to new replacements of unknown origin. The main benefits of using an original steering knuckle include:

• factory geometry and mounting points consistent with the Jaguar XF X250 design,
• consistency with other suspension system elements,
• easier diagnostics and service due to compliance with manufacturer documentation.

Installation and maintenance tips

The front right steering knuckle should be installed by a qualified service center, adhering to manufacturer procedures and appropriate bolt tightening torques. After replacement, it is recommended to:

• check the condition of the hub, bearing, and bushings working with the element,
• verify the condition of control arms, tie rod ends, and other suspension components,
• perform a wheel alignment to restore correct handling parameters. Such an approach minimizes the risk of uneven tire wear, vibrations, and improper vehicle behavior while driving.

Expansion of the suspension system in the Jaguar XF

If you are planning a comprehensive repair or upgrade of the suspension area in your Jaguar and need other elements from the same group, such as wheel hubs, bearings, or suspension bushings, check the available parts in the Jaguar Bearings, wheel hubs and bushings category.

More about the evolution of solutions in the premium class

For a comparison of design solutions used in the luxury car segment, you can familiarize yourself with the analysis of changes in suspension and chassis components in other premium brands – this is described in detail in the article Evolution of the Mercedes S-Class: from W140 to W222 – innovations, model differences, and Mercedes auto parts over the years, which shows how technical solutions developed in this vehicle class.