Mercedes W245 Side Airbag Rear Right O/S C Pillar Air Bag Beige A1698601605

Mercedes W169 W245 Right Front Seat Airbag Cushion Gray A1698603805 is an original safety component designed for the passenger seat in A-Class and B-Class models, engineered by Mercedes for precise integration with the factory airbag system. This used part from the Trim, Decorative Strips, and Covers category allows for a technically correct repair after an airbag deployment or replacement of a damaged module without altering the seat's structure.

Specifications and technical data

• SKU: A1698601605
• Mark: Mercedes (Genuine OE)
• Condition: Used
• OEM Part Number: A1698601605
• Substitutable numbers: A1698601605, A 169 860 16 05
• Location on the vehicle: Rear, Right
• Color: Beige
• Category: Trim

Purpose and Technical Function

The passenger seat airbag is an integral part of the passive safety system, working in conjunction with collision sensors and the SRS control unit. Its function is to limit the forces acting on the passenger's body during a frontal or oblique collision by controlled inflation of the gas chamber in a fraction of a second.

This component is specifically designed for the right-hand side seat, taking into account the seat geometry, electrical harness routing, and mounting points within the seat structure. This ensures the correct positioning of the airbag relative to the seatbelt and the vehicle's crumple zones.

Compatibility and Vehicle Integration

The seat airbag is intended for use in Mercedes A-Class and B-Class W169 / W245 models, in a passenger seat configuration with a factory airbag system. The module's design is adapted for compatibility with the original wiring harness and airbag control unit, allowing for the preservation of the system's factory performance parameters.

The beige color of the cover allows for an aesthetic match with light-colored interiors, without the need for upholstery modifications or additional masking. The module is prepared for installation in the rear, right-hand part of the seat structure, according to the factory mounting layout.

Construction and Performance Features

The seat airbag module consists of an air chamber, a gas generator, and a housing adapted for integration into the seat structure. The arrangement of internal components has been optimized for the direction of airbag deployment and interaction with the seatbelt, which is crucial for protection effectiveness.

The key advantages of this solution include:

• dedicated fit for the right-hand passenger seat,
• designed compatibility with the factory SRS control unit,
• preservation of the original protective zone geometry,
• aesthetic match with a light, beige interior.

Condition, Installation, and Service Aspects

The seat airbag is a used component, which allows for an economical repair of the safety system while maintaining the original construction. Before installation, it is recommended to verify the vehicle's electrical system and check for errors in the SRS control unit to ensure proper cooperation of all modules.

Due to the nature of a safety component, installation should be performed by an individual experienced in working with airbag systems, following the vehicle manufacturer's procedures, including disconnecting power, checking circuit resistance, and performing a final diagnostic test.

Expanding the Passenger Seat Area in Mercedes

If you are planning a comprehensive repair or upgrade of the passenger seat area in your Mercedes and require other parts from the same group, such as covers, trim strips, or decorative panels, check the available parts in the Mercedes Trim, Decorative Strips, and Covers category.

For drivers interested in comparing solutions used by different manufacturers for body, interior, and equipment components, an article describing the differences between sports and standard components may be helpful – you can find it here: BMW M Performance: What's the Difference Between BMW M Components and Standard Ones?.