Audi A6 C7 Rear Tail Light Lamp LED Wiring Harness Cable Left N/S 4G5945095C

Audi A6 C7 Rear Tail Light Lamp LED Wiring Harness Cable Left N/S is an original electrical installation component designed to support the driver-side LED tail light. Thanks to its factory-fit design for the vehicle's body and connectors, it ensures a stable electrical connection and proper lighting operation. This is a practical solution for post-collision repairs, lamp replacement, or damage to the factory wiring harness.

Specifications and technical data

• SKU: 4G5945095C-2
• Mark: Audi
• Condition: Used
• OEM Part Number: 4G5945095C
• Substitutable numbers: 4G5945095C, 4G5 945 095 C
• Location on the vehicle: Rear, Left
• Part type: Wire Harness
• Category: Wiring Harnesses, Cables & Connectors

Purpose and function in the vehicle

The presented wiring harness is a component from the Wires, harnesses, and connectors group, specifically designed for the rear left LED tail light in the Audi A6 C7 generation. It is responsible for transmitting control signals and power to individual lighting sections, such as position lights, brake lights, or turn signals, in accordance with the configuration of the LED lamp used.

Its placement in the rear driver-side zone allows for a direct connection between the lamp and the vehicle's main electrical installation, minimizing the risk of voltage drops and lighting system interference.

Construction and fitment for Audi A6 C7

The wiring harness has been developed as a component dedicated to Audi, which translates into:

• factory connectors compatible with the LED tail light and the vehicle's installation,
• properly selected wire length for the rear left side,
• cable routing consistent with the A6 C7 body structure.

Such fitment facilitates installation and limits the need for modifications to the electrical system, which is particularly important for maintaining the correct operation of light control systems and communication with the vehicle's electronics.

Service application and benefits of installation

Replacing the LED tail light wiring harness on the left side is recommended in situations where there are lighting problems, insulation chafing, signs of overheating, or mechanical damage to the wires. Using an original Audi component allows you to:

• restore full functionality of the LED tail light,
• maintain compliance with the factory electrical installation,
• minimize the risk of errors in the vehicle's diagnostic systems.

The product comes from the used parts group, which represents a reasonable compromise between repair costs and maintaining the manufacturer's original specifications.

Professional installation and diagnostics

Due to the importance of the lighting system for safety and regulatory compliance, it is recommended to entrust the installation of the wiring harness to a workshop with experience in the Audi brand. Proper cable routing, securing of connectors, and checking electrical parameters after installation reduce the risk of recurring faults and improper lamp operation.

If you are planning a comprehensive repair or upgrade of the rear lighting zone in your Audi and need other elements from the same group, such as additional harnesses, connectors, or wire sections, check the available parts in the Audi wires, harnesses, and connectors category.

For a better understanding of the relationship between the electrical installation and component power supply in the car, you can use the advice contained in the article Fuel system – injectors, pumps, and fuel tank: maintenance and regeneration, which discusses practical aspects of diagnostics and selecting components by OEM numbers.