Audi A6 C7 A7 4G Wiper Arm Front Windshield Driver Side Right O/S 4G2955408B

Audi A6 C7 A7 4G Wiper Arm Front Windshield Driver Side Right O/S is an original component from the Wiper arms group, designed specifically for the driver's side (offside). The precise mounting geometry and properly selected arm length ensure stable wiper blade operation, effective water drainage, and clear visibility in demanding weather conditions.

Specifications and technical data

• SKU: RHD-4G2955408B
• Mark: Audi
• Condition: Used
• OEM Part Number: 4G2955408B
• Substitutable numbers: 4G2955408B, 4G2 955 408 B
• Location on the vehicle: Front, Right
• Category: Wiper Arms

Purpose and function in the wiper system

This arm operates on the front windshield on the right side, on the driver's side for right-hand drive vehicle versions. It is responsible for transferring torque from the wiper mechanism to the blade, maintaining the correct pressure against the glass. This ensures the wiper system maintains stable operation and the windshield remains as clean as possible in the zone critical for driving safety.

Original Audi fitment

The arm comes from the line of original Audi components, which means maintaining factory parameters for kinematics, operating angle, and the blade's resting position. The construction is prepared for installation at dedicated mounting points, without the need for modifications or fitting universal parts. Such a solution minimizes the risk of vibration, noise, and uneven water clearing.

Characteristics of the used component

The item is offered as a used part, which in practice means maintaining original geometry and compatibility at a more favorable cost compared to a new replacement. An arm of this type is particularly useful for post-collision repairs, replacing worn or bent arms, and restoring the proper operation of the wiper system in vehicles used intensively.

Benefits of using an original wiper arm

Using a dedicated arm for the front, right side allows you to:

• maintain the correct wiper blade path on the windshield,
• reduce streaks and blind spots within the driver's field of vision,
• preserve the factory resting position setting,
• reduce loads on the wiper mechanism resulting from incorrect arm geometry. For Audi A6 C7 and A7 4G users, this is a practical way to perform a technically correct repair without compromising on fitment.

Selection and installation in service practice

When selecting an arm, it is worth paying attention to the compatibility of the placement on the vehicle and the body type. The original arm designed for the front, right side allows for installation using standard workshop procedures, utilizing the factory mounting point. In most cases, it is sufficient to correctly set the arm position relative to the windshield and tighten it in accordance with the vehicle manufacturer's recommendations. If you are planning a comprehensive repair or upgrade of the visibility zone and wiper system in your Audi and need other elements from the same group, such as additional arms, levers, or mounting elements, check the available parts in the Audi Wiper arms category. For users considering the use of second-hand parts in the wiper system and other vehicle components, practical tips regarding fault diagnosis and repair cost-effectiveness may be useful. More information can be found in the article about car repairs using used auto parts, where the scope of work for the regeneration and replacement of wiper elements is discussed, among other things.