Audi A3 S3 8V 3D Window Seal Inner Strip Front Door Right O/S 8V3837480

Audi A3 S3 8V 3D Window Seal Inner Strip Front Door Right O/S is an original body component from the Window seals and trims category, designed for installation on the front right door of a 3-door body style. It ensures a tight window guide, reduces wind noise, and supports the proper operation of the window lifting mechanism in Audi A3 / S3 8V generation models.

Specifications and technical data

• SKU: 8V3837480
• Mark: Audi
• Condition: Used
• OEM Part Number: 8V3837480
• Substitutable numbers: 8V3837480, 8V3 837 480
• Location on the vehicle: Front, Right
• Category: Window Seals, Gaskets & Trims

Purpose and function of the window seal

The presented seal is dedicated to the front right door in 3-door Audi A3 / S3 8V vehicles. The component operates in the contact zone between the window and the door frame, responsible for:

• limiting the ingress of water and moisture into the door interior,
• reducing wind noise at higher speeds,
• stable window guidance in the tracks,
• protecting the window edge against micro-damage.

By maintaining the factory geometry, the seal supports proper door closing and cabin acoustic comfort, which is particularly important in premium cars such as Audi.

Construction and fitment for Audi

The seal has been designed specifically for the front right door, taking into account the characteristic body line of the Audi A3 / S3 8V 3D. The properly profiled working cross-section ensures:

• precise adhesion to the door frame and window,
• stable seating in factory mounting points,
• compatibility with the original window lifting mechanism.

As a component from the Window seals and trims category, the part works in conjunction with other door seals to create a cohesive system of protection against water, dust, and noise.

Product condition and service application

The seal is offered as a used part, which allows for an economical repair while maintaining the original Audi assembly specifications. It is a practical solution in situations such as:

• wear or degradation of the existing seal,
• damage after a collision or bodywork intervention in the door area,
• the appearance of leaks, wind whistling, or increased noise in the cabin.

Using an original front right door seal helps restore factory sealing parameters and driving comfort without the need for costly replacement of the entire door or window.

Benefits of installing an original Audi seal

Choosing this front door window seal brings a number of practical service and utility benefits:

• Factory fitment – no need for modifications, the element is designed for a specific model and side of the vehicle.
• Stable window operation – reduction of side play and the risk of jamming the lifting mechanism.
• Improved acoustic comfort – reduction of wind noise and outside sounds when the doors are closed.
• Protection of the door interior – reduced risk of corrosion of internal components thanks to better water drainage.

Comprehensive service for Audi window and door zones

If you are planning a comprehensive repair or upgrade of the window and door zone in your Audi and need other elements from the same group, such as additional seals, trim strips, or window guides, check the available parts in the Audi window seals and trims category.

When selecting used body components, it is also worth checking the service guide regarding the choice of body parts – you will find practical tips in the article Post-accident repair of your car: why are used body parts a better choice than replacements?.