Audi A3 8P Rear Door Window Seal Weatherstrip Gasket Rubber Right O/S 8P4839480

Visual condition of the part

The product shows signs of use visible in the photos.

Audi A3 8P Rear Door Window Seal Weatherstrip Gasket Rubber Right O/S is a precisely fitted body component that helps maintain the seal and acoustic comfort in the rear part of the vehicle. Thanks to its factory profile, the seal works in conjunction with the window and door frame, limiting the ingress of water, dust, and noise into the cabin. It is a practical solution for users who want to restore proper window fitment after bodywork repairs or door replacement.

Specifications and technical data

• SKU: 8P4839480
• Mark: Audi
• Condition: Used
• OEM Part Number: 8P4839480
• Substitutable numbers: 8P4839480, 8P4 839 480
• Location on the vehicle: Rear, Right
• Category: Window Seals, Gaskets & Trims

Purpose and function in the vehicle

The presented seal is a component designed for installation in the rear right area of the body, in the door and side window zone. Its purpose is to:

• seal the contact point between the window and the door frame,
• limit air drafts at higher speeds,
• reduce road noise and wind noise,
• protect the interior from moisture and dirt.

By maintaining the original geometry, the seal works with the window lifting mechanism and door hardware, which promotes stable operation of the entire assembly.

Benefits of using an original Audi seal

For components such as Window seals and trims, it is crucial to maintain the correct profile and rubber hardness. Using an original Audi component allows you to achieve:

• secure fitment to the door frame without the need for modifications,
• proper window guidance in its extreme positions,
• stable adhesion along the entire perimeter,
• consistent visual appearance with other body elements.

Such a solution is particularly important after accident repairs or door replacement, when it is required to restore factory-level sealing and driving comfort.

Material and operational characteristics

The seal is made of flexible rubber material, which has been designed to operate in varying weather conditions. The construction ensures:

• resistance to typical operational loads (opening and closing doors, window movement),
• maintenance of flexibility over a wide temperature range,
• possibility of multiple disassembly and reassembly during service work.

Due to the used nature of the part, it is worth performing a standard visual inspection before installation and cleaning the contact surfaces with the door frame and window to ensure even adhesion along the entire perimeter.

Selection, installation, and compatibility

To correctly select the seal for a specific Audi A3 8P model, pay attention to the installation side and location on the vehicle. Proper fitment is facilitated by technical markings available in the specification section, including information on the location on the vehicle marked with the Placement on vehicle attribute. Installation usually involves seating the seal in the factory guide channel in the door frame, maintaining continuity at the corners and joint areas.

In case of doubts regarding compatibility, it is worth comparing the shape and length with the currently installed element or using identification data, such as SKU or OEM part number, presented in the technical specification table.

Expanding the scope of service work

If you are planning a comprehensive repair or modernization of the side glazing area in your Audi and need other elements from the same group, such as additional frame seals, trim strips, or window guides, check the available parts in the Audi window seals and trims category.

For larger body or suspension work, when disturbing noises occur while driving, a service guide may be helpful. In such a situation, it is worth reading the article Suspension knocking? Discover a clever way to restore factory handling precision without spending a fortune at the service center, which discusses common causes of noise and the possibilities of using dismantled parts to optimize repair costs.