Ford Kuga Mk1 Front Door Window Weatherstrip Seal Outer Right O/S 8V41-S20562-BE

Ford Kuga Mk1 Front Door Window Weatherstrip Seal Outer Right O/S is an original Ford body component, designed for installation on the front right door. It ensures a tight seal for the window, reduces wind noise, and protects the window edge and door from adverse weather conditions.

Specifications and technical data

• SKU: 1590640
• Mark: Ford
• Condition: Used
• OEM Part Number: 1590640
• Substitutable numbers: 1590640, 8V41S20562BE, 8V41-S20562-BE
• Location on the vehicle: Front, Right
• Category: Window Seals, Gaskets & Trims

Purpose and function of the front door window seal

The described seal belongs to the Window seals and trims category and is mounted on the outer edge of the front right door of the first-generation Ford Kuga. Its functions include:

• stable window guidance during raising and lowering,
• limiting the ingress of water and contaminants into the door interior,
• reducing wind noise at higher speeds,
• protecting the paintwork and the window edge from abrasion.

Thanks to its precise fit for the specific body model, proper adhesion to the glass and an aesthetic side profile of the vehicle are maintained.

Original origin and compatibility with Ford Kuga Mk1

The seal was designed as an original component for the first-generation Ford Kuga, which translates into precise fitment with the door frame and compatibility with the factory window lifting mechanism. The lack of need for adjustments or modifications shortens installation time and reduces the risk of leaks.

The placement on the vehicle, specified as front – right side, allows for clear identification of the correct application of the part during selection in a workshop or during DIY replacement.

Performance characteristics of the used component

As a part from the secondary market, the seal is a practical solution for accident repairs, replacing corroded or worn-out trims, and restoring body tightness. Compared to low-quality replacements, the original profile ensures:

• stable seating in factory mounting points,
• proper pressure against the glass along its entire length,
• consistent appearance with other door trim elements.

This solution is particularly beneficial when servicing vehicles used on a daily basis, where functionality, correct geometry, and adherence to factory design specifications are essential.

Support for vehicle restoration and modernization

A properly selected outer window seal has a significant impact on acoustic comfort inside the cabin and protects the window lifting mechanism from moisture. Replacing a worn component with an original used part often allows for restoring proper window operation without the need to interfere with other door components.

If you are planning a comprehensive repair or modernization of the side glazing area in your Ford and need other items from the same group, such as guide rails, frame seals, or outer trim strips, check the available parts in the Ford window seals and trims category.

Additional information and technical advice

When selecting a seal, it is worth paying attention to compatibility with the body generation and the mounting side to maintain the correct geometry of the side line and the tightness of the window-to-door contact. It is recommended to perform the installation on a clean, degreased door edge, which improves the durability of the fit and reduces the risk of looseness during operation.

For those planning a wider restoration of vehicles from years similar to the first-generation Kuga, practical tips on using used parts may be useful – you can find them in the article The second life of a youngtimer – how used car parts rejuvenate cars from 1998–2012.