Range Rover L322 Rear Axle Wheel Hub Bearing Carrier Knuckle Left N/S LR012741

Range Rover L322 rear hub with bearing and left upright is an original Land Rover suspension component, designed for installation on the rear axle on the driver's side. It is a complete support base for the wheel, ensuring stable handling, correct suspension geometry, and safe operation of the drivetrain.

Specifications and technical data

• SKU: LR012741
• Mark: Land Rover
• Condition: Used
• OEM Part Number: LR012741
• Substitutable numbers: LR012741, LR009816, AH425A969AA, AH42-5A969-AA, 8H421109CA, 8H42-1109-CA
• Location on the vehicle: Rear, Left
• Part type: Wheel Hub & Bearing Assembly
• Category: Wheel Bearings, Hubs & Seals

Purpose and Function in the Drivetrain

The presented rear wheel hub and upright is dedicated to the rear axle on the left side, where it is responsible for transferring loads from the wheel to the suspension and for precise guiding of the hub relative to the control arms and shock absorber. This element is a key mounting point for:

• wheel hub with bearing,
• suspension components (control arms, rods),
• brake system components.

Thanks to the correct geometry of the upright body, driving stability, even tire wear, and proper interaction with the vehicle's safety systems are maintained.

Advantages of Using an Original Land Rover Component

The original rear wheel hub and upright for the Range Rover L322 has been designed specifically for this model, which translates to precise assembly fit and compatibility with factory suspension solutions. In practice, this means:

• maintaining factory suspension geometry without the need for modifications,
• correct positioning of the hub relative to the brake disc and caliper,
• consistency with factory mounting points for control arms and shock absorber.

Using an OEM part is a sensible choice for repairs of off-road luxury vehicles, where both durability and compliance with the manufacturer's design are important.

Assembly and Operational Characteristics

The left-side rear wheel hub and upright is structurally prepared for direct installation in the Range Rover L322, maintaining the factory mounting system. When replacing, it is worth paying attention to:

• the condition of the mounting surfaces for the bearing and hub,
• the absence of damage in the mounting points for control arms and shock absorber,
• the correct seating of cooperating elements (hub, bearing, brake hardware).

Selecting the correct component for the rear axle on the left side reduces the risk of play, noise, and incorrect wheel alignment, which directly impacts driving comfort and safety.

Why Consider a Used Hub and Upright?

For vehicles in the Range Rover L322 class, using a used suspension component can significantly reduce repair costs while maintaining the original design specification. This is a particularly beneficial solution when the upright body is damaged or a comprehensive rebuild of the rear suspension corner is necessary.

If you want to better understand how to responsibly choose used components and dispel doubts about their durability, it's worth reading the guide: Used Car Parts: Myths and Facts You Need to Know. This is a practical addition to your knowledge when planning repairs using second-hand parts.

Land Rover Drivetrain Expansion and Modernization

If you are planning a comprehensive repair or modernization of the suspension and drivetrain area in your Land Rover and need other parts from the same group, such as additional hubs, wheel bearings, or mounting bushings, check the available parts in the category Land Rover Wheel Bearings, Hubs, and Bushings.