Toyota Yaris P9 Front Steering Knuckle Wheel Bearing Right O/S 432110D130

Toyota Yaris P9 Front Steering Knuckle Wheel Bearing Right O/S is an original suspension system component designed for vehicles with a petrol engine and manual transmission. It ensures precise steering of the front right wheel, stable hub mounting, and proper interaction with the suspension and steering system. This is a practical service solution for users looking for a proven, used part with factory geometry.

Specifications and technical data

• SKU: 432110D130
• Mark: Toyota
• Condition: Used
• OEM Part Number: 432110D130
• Substitutable numbers: 432110D130, 43211-0D130
• Location on the vehicle: Front, Right
• Fuel type: Petrol
• Gearbox type: Manual
• Part type: Wheel Hub
• Category: Wheel Bearings, Hubs & Seals

Function and role in the suspension system

The steering knuckle with wheel bearing for the front right side in the Toyota Yaris P9 is responsible for the stable connection of the hub, shock absorber, control arm, and steering system components. A correctly selected element from this group affects:

• maintaining proper suspension geometry and driving path,
• even load transfer from the wheel to the body,
• precise cooperation with the steering gear,
• reduction of vibration and noise within the front suspension. By maintaining factory mounting points, the steering knuckle promotes stable vehicle handling and predictable car behavior during braking and cornering.

Compatibility with petrol drive and manual transmission

The presented element is intended for the Toyota Yaris P9 version with a petrol engine and manual transmission. This means the design is matched to the weight characteristics and load distribution typical for this drive configuration. In practice, this translates into:

• proper interaction with factory suspension elements,
• appropriate hub positioning relative to the braking system,
• preservation of the wheel operating angles designed by the manufacturer. Selecting a steering knuckle compatible with the fuel type and transmission reduces the risk of geometry problems and accelerated tire wear.

Condition, origin, and advantages of using a used part

The offered steering knuckle with wheel bearing comes from the Wheel bearings, hubs, and bushings group and is a used item, which allows for economical repair while maintaining the original design. Compared to low-budget replacements, the OEM part provides:

• factory fitment to body and suspension mounts,
• compliance with the manufacturer's design parameters,
• possibility of direct installation without structural modifications. For many Toyota Yaris P9 users, using a used steering knuckle is a reasonable compromise between repair costs and maintaining the original handling characteristics.

Practical installation and maintenance tips

When replacing the steering knuckle with wheel bearing on the front right side, it is worth paying attention to several service aspects:

• checking the condition of cooperating suspension and steering system components,
• inspecting the shock absorber, control arm, and tie rod end mounts,
• performing a wheel alignment after installation is complete,
• assessing the condition of covers and protective elements in the wheel area. This approach allows you to fully utilize the potential of the part and reduce the risk of additional repairs shortly after replacement. If you are planning a comprehensive repair or upgrade of the suspension and chassis area in your Toyota and need other elements from the same group, such as hubs, bearings, or bushings, check the available parts in the Toyota wheel bearings, hubs, and bushings category. For owners of older models who want to better understand the potential of used components when refreshing a car, the article describing modernization scenarios using second-hand parts may be helpful: The second life of a youngtimer – how used car parts rejuvenate cars from the 1998–2012 model years.