Volvo V40 Mk3 Wheel Hub Bearing Front 31406754

Volvo V40 Mk3 Wheel Hub Bearing Front is a component from the Wheel bearings, hubs and bushings group, designed for installation on the front axle of Volvo vehicles. This OEM solution allows you to restore the proper operation of the front suspension system, driving stability, and wheel rotation precision without unwanted play or noise.

Specifications and technical data

• SKU: 31406754
• Mark: Volvo
• Condition: Used
• OEM Part Number: 31406754
• Location on the vehicle: Front
• Part type: Wheel Hub & Bearing Assembly
• Category: Wheel Bearings, Hubs & Seals

Purpose and function in the suspension system

The presented front wheel hub bearing is dedicated to installation in the front part of the vehicle, in the area responsible for transferring vertical and lateral loads and for the smooth rotation of the wheel relative to the steering knuckle. Thanks to its proper design, it ensures:

• stable front axle handling during straight-line driving and cornering,
• reduction of vibrations transmitted to the suspension and body,
• proper cooperation with brake components and tires. A properly selected hub bearing is crucial for safety, as it affects the vehicle's behavior during braking, lane changes, and driving at higher speeds.

Benefits of using an original Volvo component

Using a component from the Volvo OEM group allows you to maintain the factory operating parameters of the front suspension system. Precise fitment to the steering knuckle and hub reduces the risk of improper installation, thereby minimizing the possibility of play or uneven tire wear. In practice, this means:

• maintaining the factory front axle geometry,
• better predictability of the car's behavior,
• consistent cooperation with other suspension and brake system components. A used OEM component is a reasonable choice for repairs where compliance with factory specifications and control of service costs are important.

Placement on the vehicle and installation aspects

The wheel hub bearing is designed for installation on the front axle of the vehicle, in the immediate vicinity of the steering knuckle, brake disc, and wheel mounting components. Proper seating in this area affects:

• even load distribution during driving,
• proper operation of safety systems dependent on driving stability,
• maintaining proper tire contact with the road surface. When replacing, it is recommended to use appropriate installation tools and check the condition of neighboring components from the Wheel bearings, hubs and bushings group to avoid repeated disassembly in a short time.

Application in service and diagnostics

The front wheel hub bearing is typically replaced in situations where the following occur:

• increasing noise or humming dependent on driving speed,
• noticeable play on the wheel during inspection on a lift,
• uneven tire wear resulting from improper hub operation. Replacing with an original Volvo component allows you to restore the correct operating parameters of the suspension system and reduce the risk of further damage to the suspension or brakes.

Expanding the scope of repairs – Volvo Wheel bearings, hubs and bushings

If you are planning a comprehensive repair or upgrade of the suspension and running gear area in your Volvo and need other elements from the same group, such as additional hubs, bearings, or mounting bushings, check the available parts in the Volvo Wheel bearings, hubs and bushings category. For drivers interested in a broader approach to safety and visibility on the road, a practical guide regarding lighting may be helpful – more information can be found in the article See more and better – a complete guide to selecting and replacing used LED and Xenon headlights.