BMW F06 F06 LCI F12 F13 F13 LCI Front Stabilizer Anti Roll Sway Bar 2284511

The BMW F06 F06 LCI F12 F13 F13 LCI Front Stabilizer Anti Roll Sway Bar is a suspension component responsible for reducing body roll and improving vehicle handling. Thanks to its precise geometry and design tailored to the front axle of 6 Series models, this front stabilizer bar helps restore factory handling characteristics and driving confidence, which is especially noticeable at higher speeds and in corners.

Specifications and technical data

• SKU: 2284511
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 2284511
• Substitutable numbers: 31352284511, 2284511
• Location on the vehicle: Front
• Part type: Sway Bar
• Category: Sway Bars, Links & Bushings

Application and compatibility with BMW models

The offered stabilizer is designed for the front axle of BMW 6 Series vehicles of the F06, F06 LCI, F12, F13, and F13 LCI generations. The design was developed specifically for the suspension geometry of these models, ensuring proper lateral load transfer and compatibility with factory mounts. As a result, the component fits the original brackets, clamps, and bushings intended for this platform without the need for modifications or adaptations.

Technical characteristics and function in the suspension

The front stabilizer bar works in the suspension system as a link between the left and right sides of the axle, reducing the difference in wheel deflection when cornering. In practice, this translates into:

• more stable body behavior during dynamic driving,
• better vehicle control in emergency situations,
• reduced body roll and improved passenger comfort,
• more predictable steering response. The component works with other parts from the Stabilizers, clamps, and bushings group, creating a cohesive system responsible for the lateral stiffness of the suspension. A properly selected and installed stabilizer also helps reduce uneven tire wear resulting from excessive body roll.

Benefits of choosing an original BMW component

Choosing a stabilizer from BMW means maintaining factory suspension performance, which is particularly important in high-end cars such as the 6 Series. The original geometry and stiffness of the component ensure:

• consistent operation with stock shock absorbers, springs, and bushings,
• no installation issues resulting from inaccurate dimensions,
• maintenance of the handling characteristics intended by the manufacturer. The product comes from the used BMW parts segment, which allows for a reasonable repair cost while maintaining the original technical specification. This is an especially attractive solution for users who want to avoid unreliable aftermarket replacements with unverified parameters.

Vehicle placement and installation aspects

The stabilizer is designed for installation on the front axle, in the central part of the suspension system. Replacing this component is recommended in the event of:

• noticeable knocking from the front of the vehicle when driving over bumps,
• excessive body roll in corners,
• visible mechanical damage or corrosion on the stabilizer bar. During installation, it is worth paying attention to the condition of cooperating elements, such as clamps, brackets, and stabilizer bushings, in order to restore the full efficiency of the entire system in one service operation.

Suspension service expansion and educational materials

If you are planning a comprehensive repair or upgrade of the front suspension area in your BMW and need other elements from the same group, such as additional stabilizers, mounting clamps, or bushings, check out the available parts in the BMW Stabilizers, clamps, and bushings category. When working on the chassis and braking system, it is worth ensuring a consistent service approach – a guide describing the selection of used braking system components may be helpful, available in the article "Second-hand braking system: how to safely choose discs, calipers, and ABS?", which facilitates informed purchasing decisions.