Ford Ranger Mk6 Wheel Arch Liner Splash Guard Front Left N/S AB39-2116A563-AC

Visual condition of the part

The product shows signs of use visible in the photos.

Ford Ranger Mk6 Wheel Arch Liner Splash Guard Front Left N/S is an original Ford body component, designed to effectively protect the front left wheel arch from water, mud, and debris. Its precise fit to the body structure facilitates installation and allows for the restoration of proper wheel area protection following a collision, bodywork repair, or replacement of a damaged liner.

Specifications and technical data

• SKU: AB39-2116A563-AC
• Mark: Ford
• Condition: Used
• OEM Part Number: AB39-2116A563-AC
• Substitutable numbers: AB39-2116A563-AC, AB392116A563AC, 1741577
• Location on the vehicle: Front, Left
• Category: Splash Guards & Mud Flaps

Purpose and function of the component

The presented wheel arch liner is intended for installation in the front, left part of the body of the Ford Ranger Mk6. The component serves to direct the flow of water and mud away from critical body points and the engine compartment, which reduces the risk of corrosion and accelerated wear of suspension components.

Thanks to its proper profile, the liner stabilizes airflow around the wheel, which helps keep the shock absorber area, brake lines, and electrical installation clean. This is a practical solution for accident repairs, wheel arch restoration, or restoring factory protection after removing an old component.

Construction and fitment for Ford Ranger Mk6

The wheel arch liner has been designed as a component structurally compatible with the factory mounting points in the Ranger Mk6. Properly shaped edges allow for alignment with the fender, bumper, and internal wheel arch structure, which facilitates installation and limits the need for additional modifications.

This solution is particularly beneficial for:

• repairs after mechanical damage in the area of the front left wheel,
• replacing a worn or cracked wheel arch liner,
• preparing the vehicle for intensive off-road use.

Benefits of using an original wheel arch liner

Using a dedicated wheel arch liner in the Splash Guards category allows for effectively limiting the ingress of water, road salt, and stones into the wheel arch. This translates into:

• better protection of metal elements against corrosion,
• lower risk of damage to cables and electrical harnesses,
• a more organized working area during subsequent inspections and repairs.

This is a practical solution for users who operate their Ford Ranger both in city traffic and off-road, where wheel arches are particularly exposed to dirt and impacts from small stones.

Condition and service application

The component comes from a group of used parts, which makes it an attractive alternative for budget repairs, while allowing the structure to remain consistent with Ford's factory design. This type of liner is suitable for replacing a single, damaged component without the need to interfere with other body components.

Before installation, it is recommended to perform a standard verification of the mounting points on the vehicle and check the condition of clips and screws to ensure stable seating of the liner and proper operation throughout the entire range of wheel steering.

If you are planning a comprehensive repair or upgrade of the wheel arch area in your Ford and need other elements from the same group, such as additional covers, splash guards, or internal wheel arch panels, check the available parts in the Ford Splash Guards category.

For drivers who are simultaneously considering service or replacement of drivetrain components, a useful supplement to your knowledge may be an article describing typical problems and the selection of used transmissions – more information can be found in the material Manual, automatic, or DSG transmission – typical faults and a guide to buying a used gearbox.