Audi A5 8F Front Shock Absorber Suspension Spring Strut Left N/S 8F0413031M

Audi A5 8F Front Shock Absorber Suspension Spring Strut Left N/S is an original component from the Shock absorbers and struts group, designed for the front axle on the driver's side. Engineered by the vehicle manufacturer, it ensures consistency with factory handling characteristics, stability, and ride comfort, providing a solid foundation for professional suspension system repairs.

Specifications and technical data

• SKU: 8F0413031M-1
• Mark: Audi
• Condition: Used
• OEM Part Number: 8F0413031M
• Substitutable numbers: 8F0413031M, 8F0 413 031 M
• Location on the vehicle: Front, Left
• Category: Shocks, Struts & Assemblies

Purpose and function in the suspension system

This component plays a key role in damping vibrations and stabilizing the body in the front section of the vehicle on the left side. It is responsible for:

• controlling spring deflection and limiting body roll during braking and acceleration,
• maintaining constant tire contact with the road surface, which translates into predictable handling,
• reducing vibrations transmitted to the body and steering system.

Thanks to its factory design, the shock absorber works in harmony with other suspension components, maintaining the correct geometry and operating characteristics of the front axle.

Advantages of using an original Audi component

Using an original Audi component as the front left shock absorber allows you to maintain driving parameters consistent with the manufacturer's specifications. The most important benefits include:

• precise fitment to mounts and structural points in the wheel arch,
• preservation of factory damping characteristics, without unwanted changes in suspension stiffness,
• compatibility with standard accompanying parts, such as the spring or the upper strut mount.

For the user, this means predictable vehicle behavior in corners, stability at higher speeds, and consistent operation of safety systems that depend on suspension performance.

Professional installation and application

The shock absorber is intended for installation on the front axle on the left side, in place of the factory suspension strut. During replacement, it is recommended to:

• check the condition of the spring, upper mount, and dust covers,
• inspect for leaks and play in other front axle suspension components,
• perform a wheel alignment after installation to restore correct driving settings.

This approach allows you to fully utilize the potential of the part and restore the consistent operation of the entire suspension system.

Condition and benefits of choosing a used OEM component

The offered shock absorber is a used part, sourced from disassembly, which allows you to combine original manufacturer specifications with a more favorable purchase cost. For many users, this is a reasonable compromise between quality and budget, especially during comprehensive suspension repairs where several components are replaced simultaneously.

Choosing an original used component from the Shock absorbers and struts group allows you to maintain factory fitment and operating characteristics, avoiding random differences resulting from the use of parts of uncertain origin.

If you are planning a comprehensive repair or upgrade of the front suspension area in your Audi and need other elements from the same group, such as struts, shanks, or additional damping elements, check the available parts in the Audi shock absorbers and struts category.

More knowledge about suspension and shock absorbers

To better understand the role of the shock absorber in driving safety, the impact of its wear on braking distance, and vehicle stability, it is worth consulting specialist materials. Practical tips on diagnostics and operation can be found in the article Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers, which helps you consciously plan service and part selection for various car models.