BMW E60 E65 Rubber Boot Sunroof Roof Cover Trim Strip Right O/S 7198135

BMW E60 E65 Rubber Boot Sunroof Roof Cover Trim Strip Right O/S is a precisely fitted body component designed to protect the edge of the sunroof on the right side. Thanks to its factory geometry and the use of flexible material, it ensures a tight sunroof guide and a stable finish for the roof area in BMW vehicles. This is a practical solution for users who want to restore the correct operation of the sunroof mechanism and the aesthetic appearance of the upper body section.

Specifications and technical data

• SKU: 7198135
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 7198135
• Substitutable numbers: 54107198135, 7198135, 54137063040, 7063040, EM
• Location on the vehicle: Right
• Category: Roof Racks & Cross Bars

Purpose and function of the sunroof rubber cover

The described trim strip is a finishing and sealing element mounted on the right side of the sunroof opening. Its purpose is to:

• stabilize the sunroof edge relative to the roof panel,
• reduce the ingress of water and contaminants into the guides,
• improve the visual finish of the sunroof area,
• support the smooth operation of the sliding mechanism.

Thanks to its appropriately selected flexibility, the rubber adapts to the shape of the sunroof frame, which helps maintain even pressure and reduce unwanted noise while driving.

BMW fitment and mounting parameters

The trim strip has been designed specifically for the roof construction of BMW models, which translates into an excellent fit with factory guides and the sunroof frame. Its placement on the vehicle on the right side eliminates the risk of error when selecting the part and facilitates the identification of the correct component during repairs.

The element should be installed in the location intended by the manufacturer, along the edge of the sunroof opening. A properly seated rubber cover supports the even guidance of the sunroof panel and helps maintain the appropriate gap between the glass or panel and the roof skin.

Performance characteristics and benefits of replacement

Replacing a worn or damaged trim strip with the presented rubber cover allows you to reduce typical problems associated with sunroof operation, such as:

• increased dirt ingress into the guides,
• impaired operation of the sliding mechanism,
• unsightly gaps at the junction of the sunroof and the roof,
• potential increase in cabin noise at higher speeds.

An appropriately selected element from the Roof racks and rails group helps maintain the structural integrity of the upper body, which is important for both driving comfort and the long-term reliability of the sunroof mechanism.

Product condition and practical application

The rubber cover comes from the BMW range and is intended for re-installation in a vehicle where the right sunroof trim strip needs to be replaced. This solution is particularly useful for post-collision repairs, roof panel replacement, or comprehensive sunroof mechanism maintenance when the existing rubber is deformed or excessively worn.

Due to the factory origin of the element, its geometry and mounting method are consistent with the original vehicle construction, which facilitates installation and allows for the preservation of the sunroof's original performance properties.

Expanding your BMW roof modernization

If you are planning a comprehensive repair or modernization of the roof area in your BMW and need other elements from the same group, such as roof rails, crossbars, or additional mounts, check out the available parts in the BMW Roof racks and rails category.

If you are considering broader vehicle modifications and want to better plan the use of second-hand components, the article describing a practical approach to car modifications may be helpful – you can find it here: Tuning with used parts – how to gain performance without spending a fortune.