Audi A8 D3 Cylinder Head Cover Cylinders 1-3 Right O/S 3.2 FSI BPK 06E103472L

Audi A8 D3 Cylinder Head Cover Cylinders 1-3 Right O/S 3.2 FSI BPK is an original component from the Tappet and Valve Covers group, designed for the right side of the 3.2 FSI unit. This solution ensures the tightness of the valve chamber, stable operation of the timing system, and proper discharge of oil vapors in the Audi A8 D3 engine.

Specifications and technical data

• SKU: 06E103472L
• Mark: Audi
• Condition: Used
• OEM Part Number: 06E103472L
• Substitutable numbers: 06E103472L, 06E 103 472 L
• Location on the vehicle: Right
• Part type: Valve Cover
• Category: Rocker & Valve Covers

Purpose and technical function

The cylinder head cover for cylinders 1–3 on the right side of the 3.2 FSI BPK engine is responsible for shielding the valve mechanism and tappets, as well as maintaining the appropriate pressure and tightness in the upper part of the power unit. A properly selected cover minimizes the risk of oil leaks, limits the ingress of contaminants into the head, and supports the stable operation of the lubrication system. The component from this group is particularly important in engines with direct gasoline injection, where the precise operation of valves and tappets has a direct impact on engine refinement, performance, and fuel consumption. Using an original cover dedicated to the Audi A8 D3 allows for maintaining the factory parameters of the power unit.

Construction and fitment for Audi A8 D3 3.2 FSI BPK

The cover has been designed specifically for the geometry of the 3.2 FSI BPK engine head, ensuring proper seal guidance and stable mounting to the head. Properly shaped channels and embossments allow for correct oil flow and vapor discharge, which translates into even lubrication of the timing components. Precise fitment to the right side of the power unit facilitates installation and removal during service, and also reduces the risk of material stress. Thanks to this, the cover works with factory seals and accessories, which is crucial for maintaining system tightness.

Application in service practice

The cylinder head cover for cylinders 1–3 on the right side is used both for typical replacement of worn components and for major repairs within the head. It is effective in situations where the existing cover has suffered mechanical damage, thermal deformation, or shows signs of leaks resulting in oil loss. In service practice, it is particularly important to maintain the appropriate flatness of the contact surface and correct tightening in accordance with the manufacturer's procedure. Combined with a new gasket, such a cover allows for restoring the proper tightness of the system and limiting the risk of engine compartment contamination with oil.

Condition of the component and benefits of choosing a used part

The offered cover comes from dismantling and is sold as a used part, which represents a reasonable compromise between cost and functionality. For many Audi A8 D3 users, choosing a verified used component is an effective way to restore engine efficiency while maintaining the original design specifications. A properly selected used cylinder head cover allows for reducing repair costs while maintaining compatibility with factory engine accessories. This solution is particularly attractive for comprehensive repair work, where the number of replaced components is higher.

Fitment by OEM number and selection support

Due to the specifics of the 3.2 FSI BPK unit and the differences between Audi engine variants, it is worth verifying the compatibility of the cover by OEM number and vehicle data before purchase. Proper fitment eliminates the risk of installation problems and guarantees correct cooperation with the head and accessories. If you want to check the compatibility of the part with your car step by step, use our practical guide: selecting the right part by VIN and OEM number. There you will find a procedure, examples, and a list of questions worth asking before the final purchase of a component from the Tappet and Valve Covers group.

Expanding the scope of work within the Audi valve system

If you are planning a comprehensive repair or upgrade of the engine area in your Audi and need other elements from the same group, such as additional covers, seals, or mounting elements, check the available parts in the Audi Tappet and Valve Covers category.