Toyota Auris Mk1 Alloy Wheel Rim Silver 16" 6.5J ET:45 PZ474-E067D-Z

Toyota Auris Mk1 Alloy Wheel Rim Silver 16" 6.5J ET:45 is an original alloy rim from the Wheels group, designed for the first generation of the Toyota Auris. This used OEM component allows for maintaining the vehicle's factory appearance, consistent styling, and correct driving parameters without the need to resort to aftermarket replacements.

Specifications and technical data

• SKU: PZ474-E067D-Z-3
• Mark: Toyota
• Condition: Used
• OEM Part Number: PZ474-E067D-Z
• Substitutable numbers: PZ474-E067D-Z
• Color: Silver
• Rim diameter: 16"
• Rim width: 6.5
• Offset (ET): 45
• Hole diameter: 114
• Number of holes: 5
• Category: Rims

Technical characteristics of the rim

The rim has been designed as an alloy wheel with optimized geometry for the first-generation Toyota Auris. The applied structural parameters ensure proper handling, stability at higher speeds, and predictable suspension behavior. The pitch circle diameter and mounting hole diameter are matched to factory hubs, which facilitates installation and eliminates the need for spacers or non-standard bolts. The silver finish of the rim is visually neutral and complements both light and dark body colors well. As a result, the rim is suitable as a replacement for a single damaged wheel or as a base for completing a full set of wheels with consistent styling.

Purpose and application in the Toyota Auris

The rim was developed with the intention of maintaining the factory driving parameters of the Toyota Auris Mk1. The properly selected width, diameter, and offset translate into:

• correct wheel seating in the wheel arch without the risk of rubbing against suspension components,
• preservation of factory handling characteristics and ride comfort,
• the ability to use standard tire sizes intended for this model. Thanks to this, the rim works well both as an element restoring the car to a state close to factory condition after wheel damage, and as a part used for a subtle visual upgrade of the vehicle based on original components.

Benefits of choosing an original used rim

Choosing an original Toyota alloy rim instead of a random replacement primarily means certainty of structural fit and the preservation of suspension operating parameters intended by the manufacturer. The used OEM component allows for reduced repair costs while maintaining the visual consistency of the car and avoiding compatibility issues. If you are considering the selection of used rims, ET markings, or bolt patterns, and when to replace one rim versus a whole set, our blog article will be helpful: Do scratched rims ruin the car's look? Used original alloy wheels for Audi and BMW as a quick way to a makeover. You will find practical tips there that can also be applied to selecting rims for a Toyota. In the context of maintaining vehicle value, it is also worth considering a broader approach to using original parts – you can read more about this in our guide: Original used parts vs. resale value – how not to lose money?.

Wheel zone and mounting compatibility

The rim has been prepared for trouble-free installation in the wheel zone, maintaining standard solutions used in the Toyota Auris Mk1. The appropriate number of holes and their diameter allow for the use of standard wheel bolts intended for this model, which simplifies service and tire replacement. The selection of the correct rim has a direct impact on the operation of the braking system, suspension geometry, and ride comfort. Using a rim with parameters consistent with factory specifications reduces the risk of incorrect bearing load, excessive tire wear, or deterioration of vehicle stability during braking and cornering.

Configuration expansion – other Toyota Wheels

If you are planning a comprehensive repair or upgrade of the wheel zone in your Toyota and need other elements from the same group, such as additional rims, alternative alloy wheel designs, or complete wheel sets, check out the available parts in the Toyota Wheels category.