Ford Kuga Mk1 Propshaft Drive Prop Shaft 4x4 2.0 TDCi Diesel 9V4N-7L190-AA

Ford Kuga Mk1 Propshaft Drive Prop Shaft 4x4 2.0 TDCi Diesel is a driveshaft from the Cardan Joints group, designed for 4x4 systems in diesel versions with a manual transmission. It is a robust drivetrain component that ensures stable torque transmission from the gearbox to the rear axle during daily operation.

Specifications and technical data

• SKU: 9V4N-7L190-AA
• Mark: Ford
• Condition: Used
• OEM Part Number: 9V4N-7L190-AA
• Substitutable numbers: 9V4N-7L190-AA, 9V4N7L190AA, 1541780
• Fuel type: Diesel
• Gearbox type: Manual
• Part type: Propshaft
• Category: Propshafts

Purpose and function in the drivetrain

The presented driveshaft is designed for the first-generation Ford Kuga with a diesel engine and 4x4 drive, working in conjunction with a manual transmission. It is responsible for the mechanical connection between the front part of the drivetrain and the rear axle, enabling smooth power distribution to both axles in various road conditions.

By utilizing universal joints from the Cardan Joints group, the shaft compensates for changes in suspension and body angles, reducing vibrations and ensuring predictable vehicle behavior during acceleration, engine braking, and driving under load.

Benefits of using an original Ford driveshaft

Selecting the correct driveshaft is crucial for the durability of the entire drivetrain. Using a component dedicated to the Ford Kuga Mk1 allows you to maintain:

• correct geometry and length of the drivetrain,
• proper operating angles of the universal joints,
• stable torque transmission in 4x4 mode,
• reduction of unwanted vibrations and noise in the cabin.

This solution is particularly beneficial for urban and extra-urban driving, where the 4x4 system often operates under variable loads and requires maintaining appropriate stiffness and smooth operation.

Technical characteristics and compatibility

The driveshaft is designed to work with a diesel engine and a manual transmission, ensuring consistency with the factory configuration of the Ford Kuga Mk1 drivetrain. The design based on Cardan joints allows for safe operation at variable rotational speeds and loads typical of diesel units.

The part is sourced from dismantling, which allows for an economical replacement of a worn shaft while maintaining original performance characteristics. It is a practical solution for users who want to restore the proper operation of the 4x4 drive without interfering with the vehicle's factory design.

Condition, installation, and service application

The product is used, making it a reasonable choice for maintenance repairs when the existing shaft shows signs of wear, such as excessive play in the joints or noticeable vibrations while driving. Replacing it with a functional component helps reduce the risk of further damage to the drivetrain.

The driveshaft is intended for installation in place of the factory component, which facilitates service work and reduces vehicle downtime. When correctly matched to the engine and transmission version, it is possible to maintain factory mounting points and proper system balancing.

If you are planning a comprehensive repair or upgrade of the drivetrain in your Ford and need other components from the same group, such as intermediate shafts, universal joints, or shaft supports, check the available parts in the Ford Cardan Joints category.

For users interested in a broader approach to vehicle maintenance using parts from dismantling, practical tips on working with electronics and control modules may be useful – you can find them in the article Driving pleasure for years – how to take care of iDrive systems and electronic modules in BMW 3 and 5 series models using parts from dismantling?, which shows how to effectively use used components in advanced automotive systems.