Seat Leon Cupra 5F Rear Bumper PDC Distance Sensor Nevada White S9R 5Q0919275B

Seat Leon Cupra 5F Rear Bumper PDC Distance Sensor Nevada White S9R is an original component from the Parking sensors group, designed for operation in the rear zone of the vehicle. Thanks to its factory fitment for the PDC system in the Leon Cupra 5F, it ensures precise obstacle detection and stable operation of the parking assistance system. The white paint in the Nevada White – S9R shade allows for a consistent look with the bumper without the need for additional painting.

Specifications and technical data

• SKU: 5Q0919275B-BNE
• Mark: Seat
• Condition: Used
• OEM Part Number: 5Q0919275B
• Substitutable numbers: 5Q0919275B, 5Q0 919 275 B
• Location on the vehicle: Rear
• Color: Nevada White - S9R
• Category: Parking Sensors

Purpose and function in the PDC system

The presented sensor is a component of the parking system mounted in the rear part of the body. It is responsible for measuring the distance from obstacles behind the vehicle and transmitting a signal to the PDC controller, which then generates acoustic or visual signals for the driver. A properly functioning sensor in this location is crucial for safe maneuvering while reversing, especially in tight parking spaces and in limited visibility.

Color matching Nevada White – S9R

The Nevada White – S9R color allows for aesthetic integration of the sensor into the rear bumper of a Seat Leon Cupra 5F in this specific shade. Thanks to the factory paint finish, the component does not visually stand out from the bodywork, which is important both for post-accident repairs and when replacing a single sensor after a failure. Maintaining color consistency reduces the need for additional paint work and shortens the time required to restore the vehicle to full visual and functional efficiency.

Mounting characteristics and vehicle integration

The sensor has been designed as a component dedicated to a specific vehicle platform, which facilitates installation in the original bumper socket. The design intended for the rear body zone ensures proper measurement geometry and correct cooperation with the factory wiring and parking system controller. Using an original component reduces the risk of reading errors, accidental fault messages, and system calibration problems.

Used condition and service application

The item is offered in used condition, which is a cost-effective solution for the economical repair of the PDC system in cars used on a daily basis. This type of part will work well both for replacing a single damaged sensor after a collision or mechanical interference, and for the gradual regeneration of the entire set of sensors in the rear zone of the vehicle. Choosing an original used component allows you to maintain compatibility with the factory installation without the need to adapt replacements.

System expansion and selection of other sensors

If you are planning a comprehensive repair or upgrade of the parking zone in your Seat and need other elements from the same group, such as additional sensors, mounting elements, or wiring for the reversing system, check the available parts in the Seat parking sensors category.

When selecting used electronic components, such as parking sensors, it is worth paying attention to compatibility with the vehicle's installation as well as practical tips regarding installation and diagnostics – you will find helpful information in the article The second life of electronics – when is it worth choosing used engine controllers, comfort modules, and parking sensors?.