Skoda Octavia Scout 1Z Brake Servo Master Cylinder 2.0 TDI 1K2614105BQ

Skoda Octavia Scout 1Z Brake Servo Master Cylinder 2.0 TDI is a component from the Brake master cylinders group, designed for the braking system in the Scout version with a 2.0 TDI engine. The offered component comes from dismantling, which allows for combining an attractive price with maintaining the factory operating characteristics of the braking system.

Specifications and technical data

• SKU: RHD-1K2614105BQ
• Mark: Skoda
• Condition: Used
• OEM Part Number: 1K2614105BQ
• Substitutable numbers: 1K2614105BQ, 1K2 614 105 BQ
• Part type: Master Cylinder with Reservoir
• Category: Master Cylinders

Purpose and function in the braking system

The presented brake servo with master cylinder is a key element responsible for the proper transfer of force from the brake pedal to the pressure in the hydraulic circuits. In the Octavia Scout 1Z model with a 2.0 TDI unit, it is responsible for stable braking force distribution, pedal assistance, and maintaining the appropriate pedal travel characteristics under various road conditions. Thanks to the factory design matched to the specific body and drive configuration, the part ensures consistent operation with other braking system components, such as calipers, lines, or the ABS/ESP module.

Advantages of using an original brake master cylinder

Using an original component from the Brake master cylinders group in a Skoda Octavia Scout allows for maintaining the parameters specified by the vehicle manufacturer. In practice, this means:

• properly selected piston diameter and stroke,
• correct servo assistance characteristics,
• compatibility with the factory ABS/ESP system,
• correct positioning of ports and mounting points. As a result, the installation proceeds in an orderly manner, without the need for system modifications or interference with the brake system structure, which is particularly important for maintaining safety and consistent brake performance.

Characteristics of the used element

The offered part is a used component, sourced from vehicle dismantling. This type of solution is often chosen by conscious users who want to maintain the factory specification of the braking system while optimizing repair costs. In the case of elements such as brake master cylinders, it is particularly important to maintain the original geometry and operating parameters, which distinguishes parts sourced from dismantling from many low-budget replacements. Before installation, standard service procedures are recommended: checking the system for leaks, replacing the brake fluid, and thoroughly bleeding all circuits to fully utilize the potential of the installed element.

Selection by OEM number and technical support

When selecting elements such as brake master cylinders, it is crucial to match them to the specific body, engine, and braking system version. Verification by OEM number and vehicle data helps avoid installation problems and ensures proper cooperation with other components. If you want to check step-by-step how to properly match a part by manufacturer markings and car data, use the advice contained in the article how to choose the right car part by VIN and OEM number.

Expanding the brake system repair

When replacing the brake master cylinder, it is worth considering a comprehensive approach to brake system maintenance – including checking calipers, flexible hoses, rigid lines, and the condition of the brake fluid. You can read about how to safely use recycled elements within the braking system and how to reduce service costs in the material Brake calipers under the microscope – how to effectively reduce the costs of brake system repairs. If you are planning a comprehensive repair or upgrade of the braking zone in your Skoda and need other elements from the same group, such as servos, master cylinders, or fluid reservoirs, check the available parts in the category Skoda brake master cylinders.