What is the construction and purpose of gas springs and struts?

Gas springs and struts are components that assist the movement of body parts, such as the trunk lid, hood, or rear window. A typical sub-assembly consists of a cylinder, piston rod, seals, and mounting ends adapted to a specific vehicle. Their purpose is to facilitate opening and stably hold the element in the raised position. Depending on the car version, they differ in operating force, working length, and mounting type.

What are gas springs and struts used for?

Gas springs and struts are used for smooth lifting and controlled lowering of opening vehicle parts. They reduce the load acting on hinges and improve the convenience of daily car operation. Without a functional element, the lid or hood may not maintain its position, fall, or require the use of greater force. In practice, they also affect the safety of work near the trunk or engine compartment.

What is the construction and function of a ball joint?

A ball joint is a connection end used in many gas springs and struts. It refers to a solution where the strut socket snaps onto a ball pin attached to the body or lid. Such a system allows for an appropriate range of motion during opening and closing of the element. For correct installation, the socket diameter, position of the mounting point, and the condition of the pin itself are important.

How to choose the right strut for a specific car?

It is best to compare the OEM part number, replacement numbers, and vehicle placement. You also need to check if the part is intended for the correct body version and has compatible mounting ends. In many models, differences also concern the installation side and pre-facelift or post-facelift versions.

What symptoms indicate wear of a gas spring or strut?

The most common symptoms are the lid or hood falling automatically, lack of full lifting, and noticeably weaker support after opening. Uneven movement, jumping, or resistance when closing also occur. During inspection, it is worth checking the condition of the piston rod, tightness, and wear of the mounting points.

What data on the product should be paid attention to before installation?

Before installation, it is worth checking the brand, condition, OEM part number, replacement numbers, and vehicle placement. It is also helpful to compare the type of end and mounting points with the removed element. If the car was produced in several lid or hood variants, it is best to confirm compatibility by VIN or according to equipment.

Lift Supports & Prop Rods

Make

BMW E60 E61 Gas Pressurized Spring Hood Bonnet Front Set 7008745

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

Audi Q7 4L Front Bonnet Hood Gas Pressurized Strut Spring Lift Support 4L0823359

-5%

Part no. 4L0823359

Audi Q7 4L Front Bonnet Hood Gas Pressurized Strut Spring Lift Support 4L0823359

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

Mini F60 Front Gas Strut Hood Engine Bonnet 7388105

-15%

Part no. 7388105

Mini F60 Front Gas Strut Hood Engine Bonnet 7388105

Promo price

£18.95

£16.11

Free delivery: Jul 20

If paid before 14:00

Audi A1 8X Engine Hood Bonnet Gas Lifting Strut Left Right N/O/S 8X0823359

-5%

Part no. 8X0823359

Audi A1 8X Engine Hood Bonnet Gas Lifting Strut Left Right N/O/S 8X0823359

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

Audi RS6 C7 Bonnet Gas Strut Lift Support Left Right N/O/S Set Kit 4G8823359A

-15%

Part no. 4G8823359A

Audi RS6 C7 Bonnet Gas Strut Lift Support Left Right N/O/S Set Kit 4G8823359A

Promo price

£18.95

£16.11

Free delivery: Jul 20

If paid before 14:00

Skoda Octavia II Rear Tailgate Hatch Bootlid Left Right N/O/S Strut 1Z5827550B

-5%

Part no. 1Z5827550B

Skoda Octavia II Rear Tailgate Hatch Bootlid Left Right N/O/S Strut 1Z5827550B

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

VW Volkswagen Touran 1T Front Bonnet Hood Gas Lift Pressurized Strut 1T0823359A

-5%

Part no. 1T0823359A

VW Volkswagen Touran 1T Front Bonnet Hood Gas Lift Pressurized Strut 1T0823359A

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

BMW X5 F15 X6 F16 Hood Gas Pressure Spring Left Right Active Protection FGS Set

-15%

Part no. 7308065

BMW X5 F15 X6 F16 Hood Gas Pressure Spring Left Right Active Protection FGS Set

Promo price

£23.95

£20.36

Free delivery: Jul 20

If paid before 14:00

VW Golf CD1 Front Bonnet Hood Engine Cover Strut Lift Stay Rod Stick 5H0823363

-15%

Part no. 5H0823363

VW Golf CD1 Front Bonnet Hood Engine Cover Strut Lift Stay Rod Stick 5H0823363

Promo price

£18.95

£16.11

Free delivery: Jul 20

If paid before 14:00

Audi Q3 8U Front Bonnet Hood Gas Pressurized Strut Spring Right O/S 8U0823359B

-15%

Part no. 8U0823359B

Audi Q3 8U Front Bonnet Hood Gas Pressurized Strut Spring Right O/S 8U0823359B

Promo price

£18.95

£16.11

Free delivery: Jul 20

If paid before 14:00

Hood Gas Strut Mercedes GLC X253 Bonnet Gas Pneumatic Spring Right A2539801264

-15%

Part no. A2539801264

Hood Gas Strut Mercedes GLC X253 Bonnet Gas Pneumatic Spring Right A2539801264

Promo price

£18.95

£16.11

Free delivery: Jul 20

If paid before 14:00

BMW F10 F11 Active Bonnet Hood Gas Lifter Strut Left Right N/O/S 7309117 SET

-15%

Part no. 7309117-1

BMW F10 F11 Active Bonnet Hood Gas Lifter Strut Left Right N/O/S 7309117 SET

Promo price

£18.95

£16.11

Free delivery: Jul 20

If paid before 14:00

Audi TT 8J Bonnet Hood Lifting Gas Strut Left Right N/O/S 8J0823359C

-5%

Part no. 8J0823359C

Audi TT 8J Bonnet Hood Lifting Gas Strut Left Right N/O/S 8J0823359C

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

Audi A3 8L VW Golf Mk4 Bonnet Hood Gas Strut Lift Support 8L0823359

-5%

Part no. 8L0823359

Audi A3 8L VW Golf Mk4 Bonnet Hood Gas Strut Lift Support 8L0823359

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

Ford Ranger Mk5 Bonnet Strut Rod Gas Lift Front Right O/S EB3B-16C826-AA

-5%

Part no. EB3B-16C826-AA

Ford Ranger Mk5 Bonnet Strut Rod Gas Lift Front Right O/S EB3B-16C826-AA

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

Volkswagen Transporter T6.1 Bonnet Hood Gas Strut Damper Lifter 7E0823359

-15%

Part no. 7E0823359

Volkswagen Transporter T6.1 Bonnet Hood Gas Strut Damper Lifter 7E0823359

Promo price

£18.95

£16.11

Free delivery: Jul 20

If paid before 14:00

Range Rover Evoque L538 Bonnet Hood Panel Gas Strut Shock BJ32-16C826-AA SET X2

-5%

Part no. BJ32-16C826-AA

Range Rover Evoque L538 Bonnet Hood Panel Gas Strut Shock BJ32-16C826-AA SET X2

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

Seat Ibiza 6J Front Bonnet Hood Lift Support Strut Holder Stay 6J0823361C

-15%

Part no. 6J0823361C

Seat Ibiza 6J Front Bonnet Hood Lift Support Strut Holder Stay 6J0823361C

Promo price

£18.95

£16.11

Free delivery: Jul 20

If paid before 14:00

Audi A3 8P Front Bonnet Hood Gas Pressurized Strut Spring Holder Stay 8P0823359B

-5%

Part no. 8P0823359B

Audi A3 8P Front Bonnet Hood Gas Pressurized Strut Spring Holder Stay 8P0823359B

Promo price

£13.95

£13.25

Free delivery: Jul 20

If paid before 14:00

Promo price

£18.95

£16.11

Free delivery: Jul 20

Product currently unavailable

Showing 1-46 of 46 products

Lift Supports & Prop Rods

In the Global Parts automotive store, you will find a wide selection of used car parts, compatible with brands such as Audi, Volkswagen, BMW, and others.

Gas springs and struts – stable lifting and secure support for body components

Gas springs and struts are components that assist in lifting, holding, and controlled lowering of body parts. They are most commonly installed on the trunk lid, engine hood, tailgate, or rear window, and their purpose is to reduce the weight felt during opening. A typical component consists of a gas-filled cylinder, a piston rod, seals, and mounting ends adapted to a specific installation point. This category contains parts for which it is worth comparing the OEM number, replacement numbers, vehicle placement, and type of ends. The body version is also important, as different solutions are used in sedans, station wagons, hatchbacks, or SUVs. When completing a repair for a specific model, e.g., Audi A4 B8, it is good to verify the installation side, working length, and the method of attachment to the lid or hood.

Construction and purpose of gas springs and struts

Gas springs and struts are sub-assemblies that use gas pressure to assist the movement of an opening component. They serve to lift and hold the lid, hood, or window in the operating position without the need for the user to exert significant force. In practice, they affect the convenience of operating the car and the stability of the open body element. Their selection should take into account not only the vehicle model but also the installation location and the design of the mounts.

Comparison of gas spring and strut types

Component type	Typical application	What to check before purchase	Cooperating elements
Trunk lid gas spring	Lifting and holding the tailgate	OEM number, body version, installation side, end type	Lid hinges, mounting points, lid upholstery
Hood strut	Assisting the opening of the front engine hood	Vehicle placement, length when compressed, type of mount	Hinges, locks, and other hood parts, bumpers, hood
Rear window or lid strut	Stable lifting of light elements opened separately	OEM part number, equipment version, mounting points	Window hinges, lock, seal

Function of struts in daily vehicle use

A strut serves to take over part of the load during opening and to hold the body element in the upper position. Thanks to this, the lid or hood does not fall automatically and can be operated more smoothly, even with frequent use of the car. Symptoms of wear are most often weak support, uneven movement, or the need for manual support. When choosing a component such as a tailgate strut, it is important to compare the OEM number, end type, and compatibility with the body version.

Selection and installation considering mounts and cooperating parts

A ball joint is a mounting end that works with a pin or socket, allowing for quick seating of the strut and free movement along the axis of operation. Such a connection point must be compatible with the original solution, as differences in socket diameter, bracket setting, or operating angle affect the correctness of the installation. If you are looking for a sub-assembly such as an Audi A3 8P hood, it is worth simultaneously comparing the condition of elements from the car hoods group and parts from the hoods and parts department. In case of problems with opening or support, it is also helpful to check the area of air intakes and vents if they were removed during previous front-end repairs. When matching, it is worth considering information visible on the product, such as brand, condition, OEM part number, replacement numbers, and vehicle placement. This is especially important when the manufacturer used several mounting variants in one model generation or different struts for pre-facelift and post-facelift versions. Additional auxiliary material can be the guide Original, replacement, or used – which car parts are the most cost-effective?, which describes the differences in matching and verifying parts by VIN and OEM.

FAQ

Question	Answer
What is the construction and purpose of gas springs and struts?	Gas springs and struts are components that assist the movement of body parts, such as the trunk lid, hood, or rear window. A typical sub-assembly consists of a cylinder, piston rod, seals, and mounting ends adapted to a specific vehicle. Their purpose is to facilitate opening and stably hold the element in the raised position. Depending on the car version, they differ in operating force, working length, and mounting type.
What are gas springs and struts used for?	Gas springs and struts are used for smooth lifting and controlled lowering of opening vehicle parts. They reduce the load acting on hinges and improve the convenience of daily car operation. Without a functional element, the lid or hood may not maintain its position, fall, or require the use of greater force. In practice, they also affect the safety of work near the trunk or engine compartment.
What is the construction and function of a ball joint?	A ball joint is a connection end used in many gas springs and struts. It refers to a solution where the strut socket snaps onto a ball pin attached to the body or lid. Such a system allows for an appropriate range of motion during opening and closing of the element. For correct installation, the socket diameter, position of the mounting point, and the condition of the pin itself are important.
How to choose the right strut for a specific car?	It is best to compare the OEM part number, replacement numbers, and vehicle placement. You also need to check if the part is intended for the correct body version and has compatible mounting ends. In many models, differences also concern the installation side and pre-facelift or post-facelift versions.
What symptoms indicate wear of a gas spring or strut?	The most common symptoms are the lid or hood falling automatically, lack of full lifting, and noticeably weaker support after opening. Uneven movement, jumping, or resistance when closing also occur. During inspection, it is worth checking the condition of the piston rod, tightness, and wear of the mounting points.
What data on the product should be paid attention to before installation?	Before installation, it is worth checking the brand, condition, OEM part number, replacement numbers, and vehicle placement. It is also helpful to compare the type of end and mounting points with the removed element. If the car was produced in several lid or hood variants, it is best to confirm compatibility by VIN or according to equipment.

Summary: gas springs and struts at the Global Parts automotive store

Gas springs and struts have a direct impact on the convenience of opening and stable support of the lid, hood, and other body elements. The Global Parts offer includes used car parts for many models and versions of cars from brands such as Audi, Volkswagen, BMW, and others. When choosing the right element, it is worth comparing the OEM number, replacement numbers, installation location, and compatibility of mounts with the specific vehicle version. We invite you to contact us – we are here to help you! For more information and interesting facts, we also invite you to our automotive blog.

audi car parts audi used car parts volkswagen used car parts used car parts cheap car parts mercedes auto parts genuine parts bmw lift supports & prop rods mercedes lift supports & prop rods mini lift supports & prop rods audi lift supports & prop rods volkswagen lift supports & prop rods