Jaguar X-Type X400 Front Crash Impact Sensor Unit Module 1X43-14B006-AB

Jaguar X-Type X400 Front Air Module Crash Impact Sensor is an original safety system component responsible for precisely detecting impacts to the front of the vehicle body. Thanks to its factory design intended for this specific model, it ensures proper cooperation with the airbag module and maintains factory passenger protection parameters. This is the ideal solution for users who want to restore full functionality to the SRS system after a collision using original Jaguar electronics.

Specifications and technical data

• SKU: 1X43-14B006-AB
• Mark: Jaguar
• Condition: Used
• OEM Part Number: 1X43-14B006-AB
• Substitutable numbers: 1X43-14B006-AB, 1X4314B006AB, C2S42264
• Location on the vehicle: Front
• Part type: Sensor
• Category: Lidar & Radar Sensors

Function and application in the safety system

The front crash sensor in the Jaguar X-Type X400 acts as an input component for the SRS system, monitoring acceleration and G-forces in the front zone. Based on its signal, the airbag control unit decides whether to deploy airbags and seatbelt tensioners; therefore, the proper operation of this module is crucial for the effectiveness of protection in the event of a frontal collision. Its placement in the front of the vehicle allows for rapid detection of impact characteristics, which reduces the response time of the entire system. Using an original module ensures that the measurement characteristics are consistent with the factory SRS controller maps, without the need to adapt aftermarket solutions.

Benefits of using an original Jaguar module

Choosing an original crash sensor for the Jaguar X-Type X400 primarily offers:

• preservation of the factory logic of the airbag system,
• reliable fitment to the wiring harness and mounting points in the front zone,
• consistency with the SRS controller software used in this model. As a result, installation is straightforward, without the need for modifications to the wiring or interference with the body structure. This is particularly important for components responsible for passive safety, where the stability of electrical and mechanical parameters has a direct impact on the operation of the entire system.

Installation characteristics and vehicle integration

The module is designed to operate in the front body zone, in the location specified by the vehicle manufacturer. The appropriate housing shape and factory connector socket facilitate correct positioning and connection to the electrical system. In practice, this means:

• no need to fabricate brackets or adapters,
• maintenance of the correct sensor orientation relative to the direction of travel,
• minimization of the risk of installation errors affecting G-force readings. Such a solution is particularly beneficial for post-accident repairs, where the ability to restore the factory configuration of the safety system without structural compromises is essential.

Component condition and selection for a specific vehicle

The offered sensor comes from a group of used original Jaguar components, which allows for a reasonable repair cost while maintaining factory specifications. Before installation, a standard SRS system diagnostic procedure is recommended to confirm proper communication between the module and the vehicle's electrical system and the airbag controller. When selecting, it is worth paying attention to compatibility with the specific equipment version and model year of the Jaguar X-Type, as well as the manufacturer's requirements regarding the replacement of SRS system components after a collision. If in doubt, consulting a technician or a service center specializing in the Jaguar brand will be helpful.

More components from the same group and knowledge about used electronics

If you are planning a comprehensive repair or upgrade of the passive safety zone in your Jaguar and need other components from the same group, such as additional crash sensors, radar modules, or components supporting assistance systems, check the available parts in the Jaguar Lidar and Radar Sensors category. When choosing used electronic safety system components, it is worth knowing the basic principles of their selection and verification. Practical tips regarding the purchase of control modules, sensors, and other components can be found in the article The second life of electronics – when is it worth choosing used engine controllers, comfort modules, and parking sensors?, which discusses key aspects of safety and the cost-effectiveness of such solutions.