Ford Kuga Mk3 Bonnet Hood Hinge Front Right O/S Blue BM51-A16800-AD

Ford Kuga Mk3 Bonnet Hood Hinge Front Right O/S Black is a precision component from the Hinges, locks and other bonnet parts group, designed for operation in the front right section of the bodywork. It is responsible for the stable guidance of the bonnet, the correct geometry of its opening, and secure closing, which is important for both ease of use and the protection of engine compartment components.

Specifications and technical data

• SKU: BM51-A16800-AD
• Mark: Ford
• Condition: Used
• OEM Part Number: BM51-A16800-AD
• Substitutable numbers: BM51-A16800-AD, BM51A16800AD, 1750016
• Location on the vehicle: Front, Right
• Part type: Bonnet Hinge
• Category: Hinges, Latches & Additional Bonnet Components

Purpose and function of the bonnet hinge

The offered hinge has been designed specifically for the front right side of the third-generation Ford Kuga bonnet. Its task is to maintain a stable pivot point for the bonnet so that it moves along the trajectory intended by the manufacturer during opening and closing, without stress or skipping. A properly selected hinge reduces the risk of:

• misalignment of the gaps between the bonnet and the fenders,
• excessive load on the second hinge or the lock,
• unwanted bonnet vibrations while driving.

Construction, color and fitment

The element has a design adapted to the factory mounting points in the body and bonnet, which facilitates installation and the maintenance of proper geometry. The black color blends well with the factory finish of the engine compartment, does not introduce contrasts, and allows for an aesthetic finish of the hinge zone. Thanks to its dedicated placement on the vehicle at the front right side, the hinge works with the original bonnet and lock components without the need for modifications or adjusting mounting holes.

Characteristics of the used component

The presented hinge comes from the secondary market, which means it is a used part, verified for its suitability for further operation. This type of component retains its original geometry and operating characteristics while allowing for reduced repair costs compared to new parts. Choosing a used bonnet hinge is particularly beneficial for post-accident repairs or bodywork corrections, where maintaining factory reference points and compatibility with other body components is essential.

Benefits of using an original bonnet hinge

Using a hinge dedicated to the Ford Kuga Mk3 brings a number of practical benefits:

• Stable bonnet operation – proper guidance during opening and closing, without jamming or excessive play.
• Better maintenance of body lines – reducing the risk of one of the bonnet corners sagging and the formation of uneven gaps.
• Compatibility with factory mounting points – no need to interfere with the body structure.
• Reasonable repair cost – especially important for bodywork repairs after collisions.

Repairing the bonnet zone in a Ford

If you are planning a comprehensive repair or upgrade of the bonnet zone in your Ford and need other elements from the same group, such as additional hinges, lock components, or bonnet supports, check the available parts in the Ford hinges, locks and other bonnet parts category. When selecting used body parts, it is worth paying attention to part selection procedures, the method of verifying their origin, and the importance of original components for vehicle durability – this is discussed in more detail in our blog article: Post-accident repair and the choice of used body parts. For drivers interested in the general principles of selecting original used parts, identification procedures based on manufacturer markings, and the impact of such components on vehicle handling precision, the following material may also be helpful: BMW – sports performance and precision vs. the role of original used parts.