Volkswagen Amarok Mk2 Door Lock Handle Base Cable Rear Right O/S N1WB-E264A52-AB

Volkswagen Amarok Mk2 Door Lock Handle Base Cable Rear Right O/S is an original component from the Locks and Latches group, designed for installation in the rear right section of the vehicle body. It ensures proper cable routing and stable mounting of the door handle, which translates into reliable door opening and closing during daily operation.

Specifications and technical data

• SKU: N1WB-E264A52-AB
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: N1WB-E264A52-AB
• Substitutable numbers: N1WB-E264A52-AB, N1WBE264A52AB, N1WB-P220W98-AE, N1WBP220W98AE, N1WB-E224A36-DB, N1WBE224A36DB, N1WA-E26412-GF, N1WAE26412GF, 2HJ 839 016 J, 2HJ839016J
• Location on the vehicle: Rear, Right
• Category: Exterior Locks & Lock Hardware

Purpose and function in the door system

The described door handle base with cable is dedicated to the rear, right side of the second-generation Volkswagen Amarok body. It is responsible for a stable connection with the lock mechanism, transferring the movement of the handle to the latch assembly. Thanks to this, the door opening system operates smoothly, and the force required to release the lock remains predictable and consistent.

This component works with the factory lock mechanism, maintaining the geometry and mounting points specified by the manufacturer. This helps avoid stress on the door panel and reduces the risk of the system becoming misaligned over long-term use.

Benefits of using an original door handle base

Using an original door handle base in the Amarok Mk2 ensures:

• compatibility with the factory door and lock construction,
• proper cable routing along its entire length,
• stable mounting of the handle in the door panel,
• reduction of operational play in the opening mechanism.

By maintaining the correct geometry of the system, the lock mechanism operates evenly, which reduces wear on other components, such as the latch or the lock cylinder. This is particularly important in vehicles used in demanding conditions, where doors are frequently opened and closed.

Characteristics of the used component

The offered door lock handle base comes from dismantling and is a used part. This means it may show signs of wear typical for parts installed in a vehicle, while maintaining full structural functionality. This type of component is a good choice for maintenance repairs when the priority is to maintain the factory assembly standard at a reasonable cost.

A used original component is a solution that allows you to maintain the technical consistency of the vehicle without having to resort to replacements with uncertain geometry or material quality.

Application in the lock and latch system

The door handle base with cable is part of the complete door locking system in the Amarok Mk2. In combination with the lock, cylinder, and exterior handle, it is responsible for:

• mechanical connection between the handle and the lock,
• transferring the movement of the driver's or passenger's hand to the latching mechanism,
• maintaining the correct position of the cable relative to the lock and door panel.

In case of damage to the base, bending, or cracking, problems with opening the door from the outside, increased handle play, or uneven lock operation may occur. Replacing it with a functional part restores the proper operation of the entire system.

Compatibility and part group

The component belongs to the Locks and Latches group intended for Volkswagen vehicles. Thanks to this, it can be treated as a system part that works with other components of the door security system in the Amarok Mk2. In practice, this facilitates the selection of other elements during major repairs within the rear right body zone.

If you are planning a comprehensive repair or upgrade of the door lock zone in your Volkswagen and need other elements from the same group, such as lock mechanisms, latches, or cables, check the available parts in the Volkswagen Locks and Latches category.

Additional technical information and tips

When selecting a door handle base for the Amarok Mk2, it is worth paying attention to the compatibility of the mounting side and the body generation. Installation by a person with experience in door assembly is recommended to correctly set the cable and avoid excessive stress in the mechanism. A correctly installed component allows you to maintain the factory feel of the handle operation and even resistance when opening the door.

For those interested in a broader context of the construction and operation of body parts and locks in Volkswagen models, an article discussing the evolution of technical solutions in popular models may be helpful – you can find more information in the material Hot-hatch legend: the evolution of the VW Golf GTI from Mk1 to Mk8 – design changes and VW car parts.