Audi A4 B9 2.0 TDI DETA Diesel Engine Mount Bracket Right O/S 4M0199308BQ

Audi A4 B9 2.0 TDI DETA Diesel Engine Mount Bracket Right O/S is an item from the Engine mounts category, designed for stable mounting of the power unit on the right side in Audi diesel vehicles. A properly selected bracket reduces the transmission of vibrations to the body, improves driving comfort, and supports the correct operation of the drivetrain. This technical solution is intended for users who want to maintain the factory handling characteristics and engine refinement.

Specifications and technical data

• SKU: 4M0199308BQ
• Mark: Audi
• Condition: Used
• OEM Part Number: 4M0199308BQ
• Substitutable numbers: 4M0199308BQ, 4M0 199 308 BQ
• Location on the vehicle: Right
• Fuel type: Diesel
• Category: Engine Mounts

Function and application of the right engine mount bracket

The presented bracket plays a key role in supporting the power unit on the right side of the engine bay. In combination with other mounting elements, it is responsible for:

• maintaining the correct geometry of the powertrain relative to the body,
• damping vibrations generated by the diesel engine,
• reducing noise transmitted to the cabin,
• stabilizing the powertrain during acceleration, engine braking, and load changes.

Thanks to its fitment for the 2.0 TDI DETA unit, the bracket works in harmony with the torque curve characteristic of diesel engines, ensuring predictable drivetrain behavior under typical operating conditions.

Construction and fitment to the drivetrain

The bracket has been developed for operation in the demanding environment of the engine bay, where variable mechanical loads and elevated temperatures occur. The design is prepared to work with a diesel engine, which means resistance to low-frequency vibrations characteristic of diesels. The placement on the right side of the vehicle allows for precise transfer of forces from the power unit to the body, without unwanted displacement or play.

As an element from the Engine mounts group, the bracket contributes to a complete mounting system that affects the durability of other drivetrain components, such as drive shafts, joints, or exhaust system elements. Proper fitment of this component reduces the risk of excessive load on adjacent parts.

Benefits of using an original Audi bracket

Using a bracket intended for a specific Audi A4 B9 diesel configuration brings measurable operational benefits:

• Stable engine mounting – maintaining factory support points and predictable powertrain reactions.
• Better driving comfort – reduction of vibrations felt on the steering wheel, body, and in the cabin.
• Protection of other drivetrain elements – reduction of stress in the drivetrain and adjacent components.
• Consistency with factory design – no need for alterations, adjustments, or modifications to the mounts.

This solution is particularly recommended when replacing worn engine mounting elements, when symptoms such as excessive vibration at idle, knocking when starting off, or noticeable rocking of the power unit appear.

Characteristics of the used product

The offered bracket comes from the used Audi parts segment, which allows for economical repair while maintaining compliance with the vehicle's factory design. Choosing such a solution is often beneficial for cars used on a daily basis, where a reasonable balance between repair cost and functionality counts. A used element from original production retains the correct mounting points and geometry, which facilitates installation and shortens service time.

Before installation, it is recommended to perform a standard verification of the condition of the mounting surfaces, threads, and mating elements to ensure proper tightening and no play after installation in the vehicle.

Technical support and additional materials

If you are planning a comprehensive repair or upgrade of the engine area in your Audi and need other elements from the same group, such as additional mounts, brackets, or vibration damping elements, check the available parts in the Audi engine mounts category.

When planning larger works on the power unit, it is worth checking out practical tips regarding the selection and assessment of component condition – a guide on our blog may be helpful: how to buy a used car engine and avoid a bad deal. Additionally, if you are interested in the topic of reusing electronic components in a vehicle, take a look at the article about the second life of automotive electronics and choosing used modules, which will help you better plan broader service work.