Ford Ranger Mk6 Engine Mount Front Left N/S 3.2 TDCi Diesel EB3G-6B033-BC

Ford Ranger Mk6 Engine Mount Front Left N/S 3.2 TDCi Diesel is an original component from the Engine mounts group, designed for 3.2 TDCi diesel units. It provides stable support for the powertrain on the front left side, reducing vibrations transmitted to the chassis and improving the operating refinement of the diesel engine.

Specifications and technical data

• SKU: 1929725
• Mark: Ford
• Condition: Used
• OEM Part Number: 1929725
• Substitutable numbers: EB3G-6B033-BC, EB3G6B033BC, 1929725
• Location on the vehicle: Front, Left
• Fuel type: Diesel
• Part type: Engine Mount
• Category: Engine Mounts

Purpose and function in the powertrain

The engine mount installed in the front left part of the engine bay is responsible for the controlled transfer of loads from the powertrain to the chassis. In the case of the Ford Ranger Mk6 with a 3.2 TDCi engine, this is of particular importance due to the high torque typical of diesel units. A worn or damaged mount can cause:

• increased vibrations felt in the cabin, especially at idle,
• less precise control of the powertrain during acceleration and engine braking,
• additional stress on other mounts and accessory components. Using a properly selected front left mount allows for the restoration of correct engine support and the stability of the entire powertrain.

Benefits of using an original Ford engine mount

The original Ford engine mount for diesel units ensures a perfect fit to the mounting geometry in the Ford Ranger Mk6 and properly selected damping characteristics. As a result, it:

• limits excessive engine movement during load changes,
• reduces noise and vibrations transmitted to the vehicle interior,
• supports the durability of other mounts and engine accessory components. This solution is particularly important in commercial vehicles, where the 3.2 TDCi unit often operates under heavy loads and in varying road conditions.

Vehicle placement and compatibility

The presented mount is intended for installation in the front area on the left side of the engine bay. This placement requires the correct shape and mounting points to work in harmony with the other powertrain supports in the Ranger Mk6. The component has been designed with the diesel engine in mind, which is why its operating characteristics are adapted to the specifics of diesel units – higher torque and a different vibration range compared to petrol engines.

Characteristics of the used product

The engine mount comes from the secondary market, which allows for economical repair while maintaining the original Ford design. Such components are frequently chosen for commercial vehicles, where reasonable service costs are important while maintaining the correct operating parameters of the powertrain. Before installation, it is recommended to have the condition of the component verified by a mechanic, followed by proper tightening of the mounts in accordance with the service procedure to fully utilize the damping properties of the mount.

Repair expansion and selection of other components

If you are planning a comprehensive repair or upgrade of the engine area in your Ford and need other components from the same group, such as additional mounts, brackets, or other powertrain support points, check the available parts in the Ford engine mounts category. For larger repairs, it is worth considering purchasing several components in one place. This makes it easier to coordinate service work and reduce the risk of vehicle downtime. If you want to learn how to effectively source original used parts and avoid problems with random replacements, read the article Comprehensive supply: from the engine to the smallest clip – how to source used car parts in one place?.