Audi A7 4G Seat Cable Front Left Right N/O/S Wiring Loom Harness 4G8971365

Audi A7 4G Seat Cable Front Left Right N/O/S Wiring Loom Harness is an original electrical installation component for front seats, designed for Audi A7 4G generation models. It enables the correct connection of seat control and power supply systems on both the driver and passenger sides, ensuring stable operation of all electrical functions in this area.

Specifications and technical data

• SKU: 4G8971365
• Mark: Audi
• Condition: Used
• OEM Part Number: 4G8971365
• Substitutable numbers: 4G8971365, 4G8 971 365
• Location on the vehicle: Front, Left, Right
• Category: Wiring Harnesses, Cables & Connectors

Purpose and function of the Audi A7 4G seat wiring harness

The presented harness belongs to the Wires, harnesses and connectors category and is designed for use in the front of the vehicle, on both the left and right sides. It is responsible for routing signals and power between the vehicle's main electrical system and the seats, which is crucial for the proper operation of electric adjustment mechanisms, sensors, and other systems located in the seats.

The layout of the connectors and the length of the wires are factory-fitted to the interior architecture of the Audi A7 4G, which facilitates installation and reduces the risk of wire strain during seat operation across its full range of adjustment.

Construction and fitment to the vehicle installation

The harness is constructed as a complete set of wires with factory connectors, prepared for integration with the original Audi electrical system. The connectors used are profiled for specific sockets in the seat and under the dashboard, which minimizes the risk of incorrect connection and speeds up service work.

By maintaining the original wire routing geometry, the harness fits well into the tunnels and mounts under the seat, which promotes safe operation – the wires are not exposed to accidental pinching, abrasion, or excessive bending when the seat is moved.

Service application and benefits of installation

Replacing the seat harness is recommended in situations where there are problems with the power supply or communication of modules located in the seat, such as intermittent loss of functions, diagnostic errors, or visible damage to the wires. Using an original harness dedicated to the Audi A7 4G allows for restoring proper circuit continuity without the need for makeshift repairs to the installation.

The component is suitable both for standard repairs following mechanical damage in the seat area and for interior swaps between vehicles of the same model, where maintaining installation compatibility on the driver and passenger sides is required.

Condition of the component and installation aspects

The product comes from the used parts group, which allows for an economical repair while maintaining the manufacturer's original specifications. Before installation, a standard visual inspection of the connectors and wire insulation is recommended, followed by routing the harness according to the factory mounting points under the seat and in the front part of the vehicle.

Due to its location in a moving zone (seat adjustment), correct routing of the wires is important for long-term, trouble-free operation – proper placement limits strain and protects the harness from damage during daily use.

Expanding the installation within Audi seats

If you are planning a comprehensive repair or upgrade of the front seat area in your Audi and need other components from the same group, such as additional wire sections, connectors, or harnesses connecting to the body installation, check the available parts in the Audi wires, harnesses and connectors category.