Land Rover Discovery 3 Wiper Arm Blade Front Right O/S 6H32-17526-AA

Visual condition of the part

The product shows signs of use visible in the photos.

The Land Rover Discovery 3 right front wiper arm is an original part from the wiper arms category, designed to work on the driver's or passenger's side depending on the steering wheel version. It ensures stable blade guidance on the windshield, which translates to clear visibility and safe vehicle operation in adverse weather conditions.

Specifications and technical data

• SKU: RHD-6H32-17526-AA
• Mark: Land Rover
• Condition: Used
• OEM Part Number: 6H32-17526-AA
• Substitutable numbers: 34889, 6H32-17526-AA, 6H3217526AA
• Location on the vehicle: Front, Right
• Part type: Wiper Arm
• Category: Wiper Arms

Intended Use and Fitment for Land Rover Discovery 3

The presented right front wiper arm has been designed specifically for the Land Rover Discovery 3. The construction is adapted to the geometry of the windshield and the factory wiper mechanism, allowing for the maintenance of the correct blade path and even pressure along its entire length.

Its placement on the vehicle is front, right side, enabling the part to work with the original mounting and wiper drive system. This precise fit minimizes the risk of vibrations, noise, and uneven water removal from the windshield.

Construction and Technical Properties of the Wiper Arm

The wiper arm for the Discovery 3 utilizes factory geometry, which ensures:

• stable blade guidance across the windshield surface throughout its full range of motion,
• appropriate working pressure, matched to the windshield's curvature and blade length,
• proper cooperation with the drive shaft of the wiper mechanism, without play or skipping.

A properly shaped arm reduces the phenomenon of blade lift at higher speeds and minimizes streaking, which is particularly important when driving in rain or on dirty windshields.

Condition, Origin, and Benefits of Using a Used Part

This part comes from the group of original Land Rover wiper arms and is offered as a used part. This means it retains the factory design and operational characteristics intended by the vehicle manufacturer, while offering a lower cost compared to a new component.

Using an original, used wiper arm allows you to:

• maintain compatibility with the factory wiper system without the need for modifications,
• preserve the correct working angle and range of motion on the right side of the windshield,
• minimize the risk of installation issues typical of aftermarket replacements with different geometries.

Installation and Operation in the Wiper System

The arm is designed for installation at the factory mounting point on the front wiper axle on the right side. In practice, this means:

• direct fit to the original spline or mounting on the wiper mechanism,
• compatibility with standard blades used in the Land Rover Discovery 3,
• maintaining the windshield cleaning area intended by the manufacturer on the passenger or driver's side (depending on the version).

A correctly selected wiper arm is crucial for effectively clearing water, mud, and snow from the windshield, which directly impacts driving comfort and safety.

Land Rover Wiper Arms – Selection and Offer

If you also need other elements of this type, check the available Land Rover wiper arms in our offer: Land Rover wiper arms. This will allow you to easily assemble a complete set for the front or rear axle, maintaining structural consistency of the entire system.

Visibility Safety and Vehicle Technical Condition

A functional wiper arm is just one of the elements affecting driving safety in adverse conditions. The condition of the cooling system and the overall state of the engine unit are equally important. You can find more about the impact of engine operating temperature on its durability in the article: engine cooling system – overheating, repair, and used radiators.