Ford Ranger Mk6 T6 Front Door Window Innen Seal Strip Left N/S EB3B-26201A37-AA

The Ford Ranger Mk6 T6 Left Front Door Inner Window Seal is a precisely fitted body component responsible for the sealing and stable guidance of the window. Thanks to Ford's factory design, it ensures secure adhesion to the window edge, reducing noise, vibrations, and the ingress of contaminants into the door interior.

Specifications and technical data

• SKU: EB3B-26201A37-AA
• Mark: Ford
• Condition: Used
• OEM Part Number: EB3B-26201A37-AA
• Substitutable numbers: 2431428, EB3B-26201A37-AA, EB3B26201A37AA, EB3B26201A37AB, EB3B-26201A37-AB
• Location on the vehicle: Front, Left
• Part type: Window Trim
• Category: Window Seals, Gaskets & Trims

Purpose and Function in the Vehicle

The presented sealing strip is designed for installation on the Ford Ranger Mk6 T6 front left door, on the inner side of the window. It is responsible for:

• sealing the contact between the window and the door panel from the cabin side,
• stable window guidance during raising and lowering,
• reducing air drafts and wind noise at higher speeds,
• minimizing the ingress of dust and moisture into the door interior.

Thanks to its proper profile and fit to the door construction, this element supports acoustic and functional comfort in the daily operation of the pick-up.

Original Origin and Compatibility

The seal comes from the Ford parts line, which means adherence to factory dimensional and material standards. Original origin translates to:

• correct fit with the door frame without the need for modifications,
• compatibility with the factory window lifting mechanism,
• easier installation compared to universal aftermarket parts.

The element is assigned to a specific location on the vehicle – front, left side – which minimizes the risk of errors in part selection and facilitates repair or replacement planning.

Condition and Benefits of Using a Used Part

The offered seal is a used part, sourced from dismantling, which allows for economical repair while maintaining the original Ford specification. Choosing this solution offers:

• lower cost compared to a new OEM part,
• preservation of the original shape and stiffness of the strip,
• reduced risk of poor fit characteristic of cheap aftermarket alternatives.

This is a practical solution for replacing a worn, cracked, or mechanically damaged seal that causes noise, window play, or leaks.

Importance of a Proper Window Seal in the Ford Ranger Mk6 T6

A functional inner window seal in the Ford Ranger Mk6 T6 directly impacts:

• driving comfort – reduced cabin noise and stable window operation,
• protection of the window lifting mechanism from excessive dirt,
• reduced risk of corrosion inside the door due to better moisture control,
• aesthetics of the window edge from the interior side of the vehicle.

Replacing a worn strip with an original Ford part allows for the restoration of factory window operating conditions and improves the overall driving experience of the vehicle.

Related Parts and Additional Information

If you are planning a comprehensive repair or upgrade of the window and door area in your Ford and need other parts from the same group, such as inner window guides, outer window trim, or additional sealing profiles, check the available parts in the Ford Window Seals and Trim category.

To better plan your car's service and find out which wear parts are worth checking when replacing seals, consult the guide TOP 10 Most Frequently Replaced Parts in Your Car, where you will find practical tips for the daily operation of your vehicle.