Peugeot 207 Window Seal Front Door Left N/S Frame Gasket Rubber 9300W4

Peugeot 207 Window Seal Front Door Left N/S Frame Gasket Rubber is an original component from the Window seals and trims group, designed for installation in the front left door. The precisely shaped profile ensures a tight fit against the glass and door frame, which reduces noise, improves acoustic comfort, and helps protect the vehicle's interior from moisture and contaminants.

Specifications and technical data

• SKU: 9300W4
• Mark: Peugeot
• Condition: Used
• OEM Part Number: 9300W4
• Substitutable numbers: 9300W4, 9300 W4
• Location on the vehicle: Front, Left
• Category: Window Seals, Gaskets & Trims

Purpose and function of the seal

The seal has been designed specifically for the front left door area, where it is responsible for stable glass guidance and maintaining a seal between the glass and the bodywork. A correctly selected seal:

• limits water ingress into the door interior and cabin,
• reduces wind noise at higher speeds,
• supports the proper operation of the window lifting mechanism,
• reduces the risk of window fogging due to better insulation.

Thanks to the fitment for a specific Peugeot model, the proper body lines and factory glass contact geometry are maintained.

Benefits of using an original Peugeot seal

Using an original seal in the driver's door allows for maintaining the structural integrity of the body and predictable vehicle behavior in daily use. The component from this group provides:

• factory fitment to the door frame and window guides,
• stable support for the glass in extreme positions,
• a uniform contact line with the body, which reduces air turbulence,
• more comfortable acoustic conditions in the cabin.

Replacing a worn seal with a component from the same design group is particularly important after door disassembly, body and paint repairs, or when symptoms such as wind whistling, leaks, or loose window operation occur.

Installation characteristics

The seal is intended for installation in the front left part of the body, in the driver's door area. The design, adapted to factory mounting points, facilitates proper seating of the component in the door frame without the need for bodywork interference. During installation, it is worth paying attention to:

• thorough cleaning of the contact surface from remnants of the old seal,
• checking the condition of the window guides and the lifting mechanism,
• even pressing of the seal around the entire perimeter.

Such an approach allows for fully utilizing the sealing and acoustic properties of the component and reduces the risk of needing to disassemble it again in the near future.

Condition of the component and service application

The seal comes from disassembly, which makes it an attractive solution for maintenance repairs and post-accident service, where the priority is to maintain the original geometry and sealing profile. This type of component will work well both in professional workshops and for DIY replacement, provided that basic installation procedures are followed.

If you are planning a comprehensive repair or upgrade of the side glazing area in your Peugeot and need other components from the same group, such as perimeter seals, guide strips, or additional sealing profiles, check the available parts in the Peugeot window seals and trims category.

For those interested in the wider use of components from disassembly in modernization and visual projects, practical tips on selecting and installing components can be found in the article Emotions and design – visual and mechanical tuning of a Seat using components from disassembly.