Toyota Verso R2 Rear Door Glass Run Water Channel Right O/S 2009-2010 681420F020

Toyota Verso R2 Rear Door Glass Run Water Channel Right O/S is an original body component designed for the rear passenger-side door in models from 2009–2010. It ensures stable glass guidance and effective water drainage from the window channel, which reduces noise, vibrations, and the risk of moisture entering the interior. This is a practical solution for users who want to restore the proper operation of the window mechanism and maintain cabin acoustic comfort.

Specifications and technical data

• SKU: 681420F020
• Mark: Toyota
• Condition: Used
• OEM Part Number: 681420F020
• Substitutable numbers: 681420F020, 68142-0F020
• Location on the vehicle: Rear, Right
• Part type: Window Run Channel
• Category: Window Seals, Gaskets & Trims

Purpose and function of the component

The described seal belongs to the Window seals and trims category and is fitted to the rear, right side of the body. Its task is to guide the window in the correct track and create a water channel that drains moisture from the edge of the glass to the outside of the door. This helps reduce streaks, window fogging, and premature wear of components inside the door. Using the correct seal in this location contributes to:

• smooth raising and lowering of the window, without jamming or skipping,
• reduction of lateral window play and noise reduction while driving,
• better protection of the door interior against water and contaminants.

Why it is worth using an original Toyota seal

The component was designed specifically for the Toyota Verso body, which translates into precise fitment to the shape of the door frame and proper adhesion to the glass. The original geometry of the water channel and guide minimizes the risk of leaks and excessive wear on the window lifting mechanism. Key advantages include:

• maintaining the factory contact line between the glass and the door frame,
• reduction of wind noise at higher speeds,
• maintaining proper window pressure in the rear part of the body.

Installation and service aspects

The seal is intended for installation in the rear, right part of the vehicle, within the door frame. Replacement is usually performed by removing the door trim and taking out the old guide, then seating the new component in the factory slots. Proper positioning of the seal in the channel is crucial for maintaining tightness and smooth window operation. Due to the used nature of the part, this is a cost-effective solution that allows you to restore proper window function without the need to invest in a new component. Before installation, it is recommended to perform a standard inspection of the working surfaces and clean the door frame of any dirt.

How to choose the right seal for your car

To ensure compatibility, it is worth verifying the year, body version, and installation side against your Toyota Verso. It is also helpful to compare the shape and length of the seal with the component removed from the vehicle. If in doubt, tips on selecting used parts and reference numbers, described in more detail in the article, may be useful: how to professionally select used car parts, saving time and nerves.

Expanding upgrades within window seals

If you are planning a comprehensive repair or upgrade of the window area in your Toyota and need other elements from the same group, such as additional guide seals, trim strips, or edge seals, check the available parts in the category Toyota window seals and trims. When performing service work on the window and door system, it is also worth paying attention to the general rules for selecting used parts and verifying their technical condition – you will find practical tips in the guide: what to look for when buying used power system components and other dismantled parts.