VW Volkswagen Tiguan 5N Front Right O/S Inner Window Aperture Seal 5N0837480

The Right Front Windshield Opening Inner Seal for VW Tiguan 5N is an original body part from Volkswagen, designed for installation on the front passenger side. It ensures a tight seal for the window in the door, reduces wind noise, and supports the proper operation of the window lifting mechanism, contributing to acoustic and functional comfort inside the vehicle.

Specifications and technical data

• SKU: 5N0837480
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: 5N0837480
• Substitutable numbers: 5N0837480, 5N0 837 480
• Location on the vehicle: Front, Right
• Category: Window Seals, Gaskets & Trims

Purpose and Function in the Body

The presented seal is a component from the Window Seals and Trim group, dedicated to the front right door of the first-generation Volkswagen Tiguan (5N). It is responsible for sealing the inner edge of the window opening, stabilizing the glass pane in the guide, and reducing vibrations during driving.

Thanks to its proper profile and fit to the door structure, this part helps to prevent water, dust, and drafts from entering the interior, and also reduces the risk of accelerated wear of the window lifting mechanism.

Benefits of Using an Original VW Seal

Using an original Volkswagen body part allows for maintaining the factory fit and geometry of the window opening. In practice, this means:

• proper window guidance throughout its entire range of motion,
• stable adhesion to the door frame,
• better cabin acoustic insulation,
• reduction of cracks and creaks originating from the window area.

This solution is particularly recommended when replacing worn or deformed seals, when wind noise occurs at higher speeds, leaks appear, or there are problems with smooth window operation.

Vehicle Placement and Fitment

The component is designed for installation in the front – right side of the vehicle, in the inner part of the passenger door window opening. The seal's design is profiled for the specific Tiguan 5N body model, which facilitates installation and ensures proper adhesion to the sheet metal edges and the window frame.

Before purchasing, it is advisable to verify the part's compatibility with your vehicle based on the manufacturer's markings or vehicle data to ensure full compatibility with your specific equipment version.

Product Characteristics and Practical Application

The offered seal is from the group of original Volkswagen body components and is intended for reinstallation in the vehicle. It is suitable for both standard replacement of a worn part and for repairs after a collision or bodywork intervention in the door area.

Replacing this seal is recommended when the following are observed:

• increased wind noise around the front right door,
• signs of leaks or water in the lower part of the door upholstery,
• resistance or jamming of the window when raising and lowering.

Assistance with Part Selection and Additional Materials

When selecting body parts, it is advisable to use manufacturer markings and vehicle data to avoid fitment issues. For more advanced repairs or to deepen your knowledge on selecting original components using manufacturer markings, the following guide article may be helpful: Audi's Five-Cylinder Engine – A Legend from Quattro to RS3 and How to Care for it with Original Audi Parts, which discusses, among other things, practical principles for using manufacturer numbers when searching for parts.

If you are planning a comprehensive repair or upgrade of the glazing and door area in your Volkswagen and need other parts from the same group, such as additional seals, trim strips, or window guides, check the available parts in the Volkswagen Window Seals and Trim category.