VW Volkswagen Amarok Mk2 Rear Door Seal Rubber Gasket Inner Right O/S 2HJ839912B

VW Volkswagen Amarok Mk2 Rear Door Seal Rubber Gasket Inner Right O/S is an original component from the Window seals and moldings group, designed for installation on the inner side of the door. It ensures a tight closure of the door panel, reduces noise, and protects the interior from moisture and contaminants, supporting acoustic comfort and body durability.

Specifications and technical data

• SKU: 2HJ839912B
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: 2HJ839912B
• Substitutable numbers: 2HJ839912B, 2HJ 839 912 B
• Location on the vehicle: Rear, Right
• Category: Window Seals, Gaskets & Trims

Purpose and function of the Amarok Mk2 door seal

The presented seal is matched to the rear right side of the body, on the inner edge of the door. Its task is to create a continuous, flexible barrier between the door panel and the body, which limits the ingress of water, dust, and air drafts into the cabin. This improves acoustic insulation and ensures that upholstery elements and electrical installations are better protected against the long-term effects of moisture.

The properly selected rubber profile and factory fitment for the specific Amarok Mk2 model facilitate installation and allow for maintaining the correct door closure geometry, which is important both for user comfort and for reducing rattling or squeaking while driving.

Benefits of using an original Volkswagen seal

Using an original door seal in the Volkswagen Amarok Mk2 allows you to maintain factory sealing and fitment parameters. The component has been designed specifically for the geometry of the rear right door, thanks to which it:

• maintains stable pressure along the entire perimeter, which supports tightness during rain and pressure washing,
• helps reduce wind noise and noise from the wheel arch area,
• supports the protection of sills, pillars, and lower parts of the upholstery against dampness,
• reduces the risk of corrosion in the area of the door edge and adjacent body elements.

For the user, this means more stable operating conditions – the cabin remains dry, and the interior is less exposed to accelerated wear resulting from the influence of external factors.

Installation characteristics and application

The seal is intended for installation in the rear right area of the body, on the passenger side. The design, matched to the specific model, facilitates correct positioning on the door edge without the need for modifications or cutting. In practice, this translates into:

• consistent adhesion to factory mounting points,
• the ability to restore the original contact line between the door and the body,
• maintaining the correct operation of the lock and hinges thanks to the proper resistance of the rubber.

Such a solution is particularly important during post-accident repairs, replacing corroded body elements, or when eliminating leaks that appear after years of operation.

Condition of the item and practical aspects

The offered seal is a used item, which in the case of original body components often represents a favorable compromise between quality and repair cost. For many users of commercial vehicles, such as the Amarok, choosing a verified part from dismantling allows for maintaining the car in good technical condition with a rational service budget.

If you are considering whether a better solution would be to refurbish the existing seal or install a used component, a guide material discussing the differences between these approaches may be helpful – you can find it here: Refurbished or used original – which part to choose for repairs?.

Complementary Volkswagen Window seals and moldings

If you are planning a comprehensive repair or upgrade of the door area in your Volkswagen and need other elements from the same group, such as additional edge seals, window moldings, or inner sealing profiles, check the available parts in the Volkswagen Window seals and moldings category.