BMW F34 GT Wheel Carrier Hub Front Right O/S 6798260

The Front Right Wheel Hub and Knuckle for BMW F34 GT is an original part from the Bearings, Wheel Hubs, and Bushings group, designed for installation on the front axle on the passenger side. This OEM solution ensures proper wheel guidance, suspension stability, and correct interaction with the braking and steering systems in your BMW.

Specifications and technical data

• SKU: 6798260
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 6798260
• Substitutable numbers: 6798260, 31216798260, 189159
• Location on the vehicle: Front, Right
• Part type: Wheel Hub & Bearing Assembly
• Category: Wheel Bearings, Hubs & Seals

Purpose and Function in the Drivetrain

The wheel hub and knuckle for BMW F34 GT is responsible for the precise seating of the wheel on the front right side of the vehicle and for the stable connection of suspension, steering, and braking components. A correctly selected part in this area is crucial for:

• maintaining proper wheel geometry and driving track,
• even tire wear,
• vehicle stability during braking and acceleration,
• safe transfer of loads from the road surface to the suspension.

Thanks to its precise fit for the BMW F34 GT model, this component works with factory mounting points, which facilitates installation and reduces the risk of alignment issues.

Construction and Fitment for BMW

The offered wheel hub and knuckle has been designed by BMW as a structural component of the drivetrain, ensuring adequate rigidity and resistance to operational loads. Using an original part from the Bearings, Wheel Hubs, and Bushings group means:

• maintaining the original operating parameters of the wheel bearing,
• correct positioning of the brake disc relative to the caliper,
• proper connection with the shock absorber, control arms, and tie rod,
• compatibility with standard sensors and accessories intended for the front axle.

Its placement on the vehicle is limited to the front right side, so the part should be treated as dedicated to a specific mounting position, with no possibility of swapping sides.

Performance Characteristics and Benefits of Use

Choosing the original wheel hub and knuckle for BMW F34 GT allows for maintaining the structural integrity of the entire drivetrain. In practice, this translates to:

• more predictable car behavior in corners,
• stable handling at higher speeds,
• correct interaction with safety systems (ABS, traction control – if present in the vehicle),
• easier diagnosis and servicing of the suspension in the future.

The part comes from a dismantled vehicle, which allows for combining a favorable purchase cost with the preservation of OEM specifications. This is a particularly attractive solution for collision repairs or when replacing worn suspension components on the passenger side.

Condition, Origin, and Practical Aspects

The wheel hub and knuckle is offered as a used original BMW part, meaning it comes from the vehicle manufacturer's original production, not from the aftermarket. This ensures:

• original mounting points and geometry,
• compliance with BMW service documentation,
• possibility of verifying origin by part numbers and interchangeable numbers.

Before installation, a standard inspection of the bearing condition and cooperating elements is recommended, in accordance with the vehicle manufacturer's service procedures.

Technical Support and Selection of Used Parts

If you want to better understand how to safely use parts from dismantled vehicles and clear up any doubts regarding their durability, it is worth reading the article Used Car Parts: Myths and Facts You Need to Know, which discusses common concerns and practical principles for selecting such components.

If you are planning a comprehensive repair or upgrade of the suspension and drivetrain area in your BMW and need other parts from the same group, such as hubs, bearings, or bushings, check the available parts in the BMW Bearings, Wheel Hubs, and Bushings category.