Skoda Octavia II Rear Right O/S Suspension Leg Brake Disc Wheel Hub Disc Caliper

Skoda Octavia II Rear Right O/S Suspension Leg Brake Disc Wheel Hub Disc Caliper is a complete service solution designed for the rear axle on the passenger side. This item from the Suspension replacement kits category allows for the efficient replacement of the entire module, which facilitates the restoration of proper geometry, stability, and braking efficiency in the vehicle. By integrating several components into one assembly, repair time and the risk of part mismatch are significantly reduced.

Specifications and technical data

• SKU: 1K0505436P-1
• Mark: Skoda
• Condition: Used
• OEM Part Number: 1K0505436P
• Substitutable numbers: 1K0505436P, 1K0 505 436 P
• Location on the vehicle: Rear, Right
• Category: Suspension Component Replacement Kits

Purpose and vehicle placement

The presented kit is intended for the rear right side of the vehicle, which is crucial for correct selection and installation. Using a complete suspension module with a hub, brake disc, and caliper allows for consistent operation of the chassis and braking system on that side of the car, minimizing differences in vehicle behavior between the left and right sides of the axle.

Such a solution is particularly beneficial in cases of major mechanical damage, corrosion, or after a collision, when replacing individual elements might be insufficient or time-consuming. Using one complete assembly also facilitates technical condition monitoring and subsequent diagnostics.

Kit construction and benefits of using a complete module

The configured suspension assembly includes components responsible for both wheel guidance and the transmission of braking forces. As a result, the mechanic receives a consistent, factory-matched system in which:

• the steering knuckle and suspension arm ensure proper wheel guidance and maintenance of geometry,
• the wheel hub works with the bearing, responsible for smooth rotation and stability,
• the brake disc provides a working surface for the braking system,
• the brake caliper generates braking force and keeps the pads in the correct position.

Combining these elements into one module translates into more predictable suspension behavior, even tire wear, and vehicle stability during braking and cornering. For the workshop, this means fewer potential points of error during installation and easier quality control of the performed repair.

Characteristics of the used part and quality aspects

The offered item is a used part sourced from dismantling, which in practice means a favorable compromise between repair cost and maintaining the manufacturer's original specifications. In the case of suspension and braking systems, using components from a single donor vehicle promotes dimensional consistency and proper fit of mating surfaces.

During installation, standard service procedures are recommended: thorough cleaning of contact surfaces, inspection of fasteners, correct tightening torques, and bleeding the brake system after connecting the lines. This approach allows for fully utilizing the kit's potential and reducing the risk of subsequent play or uneven brake operation.

Why choose Skoda Suspension replacement kits

Complete Suspension replacement kits for the Skoda brand are particularly recommended in situations where repair repeatability and reducing vehicle downtime are important. Instead of selecting individual components, the mechanic receives a ready-to-install module that:

• simplifies the ordering and parts logistics process,
• reduces the risk of dimensional incompatibility between elements,
• facilitates geometry control after installation,
• promotes even wear of tires and brake components.

If you are planning a comprehensive repair or upgrade of the suspension area in your Skoda car and need other elements from the same group, such as additional arms, steering knuckles, or complete axle modules, check the available parts in the Skoda Suspension replacement kits category.

Operation and extending the kit's service life

To maximize the potential of this module, it is worth ensuring regular inspection of the suspension and braking system. This includes periodic checking for play, assessing disc and pad wear, inspecting brake lines, and observing any potential noises while driving. A properly installed and serviced kit will ensure stable vehicle handling and predictable braking in typical road conditions.

Additional practical tips regarding the maintenance and use of parts from dismantling – including suspension and brake components – can be found in the article: How to extend the service life of used car parts?. This is valuable supplementary knowledge for workshops and users who want to consciously operate used subassemblies.

Summary

Skoda Octavia II Rear Right O/S Suspension Leg Brake Disc Wheel Hub Disc Caliper is a practical service solution for vehicles requiring simultaneous intervention in the suspension and braking system on that side of the axle. The completeness of the module facilitates installation, promotes the maintenance of geometry, and improves the consistency of the entire chassis system. For the user, this means more stable handling, and for the workshop – a faster, more predictable repair based on the manufacturer's original design.