BMW E87 E90 Suspension Axle Wheel Hub Stub Axle Carrier Front Right O/S 6764444

BMW E87 E90 Suspension Axle Wheel Hub Stub Axle Carrier Front Right O/S is a component from the Steering Knuckles category, designed for use on the front right axle in selected BMW 1 and 3 Series models. It allows for the restoration of proper suspension geometry, stable handling, and correct operation of the wheel hub and associated components. Thanks to its factory OEM design, it is a solution well-matched to the chassis of these models.

Specifications and technical data

• SKU: 6764444-1
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 6793924
• Substitutable numbers: 31216793924, 6793924, 31216764444, 764444
• Location on the vehicle: Front, Right
• Category: Steering Knuckles

Purpose and function in the suspension system

The steering knuckle with hub mounted on the front right side of the vehicle is a key component connecting the suspension strut, wheel hub, and steering system elements. It is responsible for:

• maintaining the correct position of the wheel relative to the body,
• transferring loads from the road surface to the suspension,
• ensuring stable mounting of the hub and braking components,
• cooperating with the steering system in terms of wheel turning.

A properly selected steering knuckle helps maintain correct wheel alignment, which translates into predictable handling, even tire wear, and safe vehicle behavior during braking and maneuvers.

Compatibility with BMW E87 and E90

The presented steering knuckle with hub has been designed to work with selected versions of the BMW 1 Series E87 and 3 Series E90, in the front – right side configuration. The design corresponds to factory solutions used by BMW, which facilitates installation in place of the original component without the need to modify other suspension sub-assemblies.

By maintaining geometry consistent with the manufacturer's design, after proper installation and wheel alignment, you can achieve stable handling and proper cooperation with other chassis components.

Characteristics and advantages of use

The steering knuckle with hub for the front right axle in a BMW serves both a load-bearing and guiding function, which is why its condition has a direct impact on driving comfort and safety. Using this component allows you to:

• restore the correct mounting points for the shock absorber, control arm, and tie rod end,
• ensure stable seating of the wheel hub,
• minimize play and unwanted movement within the front suspension,
• obtain predictable vehicle reactions to steering inputs.

In the case of mechanical damage, corrosion, or deformation, a factory steering knuckle with hub is often the most effective way to restore the proper operation of the entire suspension corner.

Component condition and installation aspects

The offered steering knuckle with hub is a used part, which allows for an economical repair while maintaining the original BMW design. Before installation, standard workshop verification is recommended, and after installation – performing wheel alignment to fully utilize the potential of the suspension system.

The component is intended for installation in place of the factory steering knuckle, using standard mounting points. Thanks to this, service work can be carried out in a typical workshop specializing in suspension and steering systems.

Expanding repairs within BMW Steering Knuckles

If you are planning a comprehensive repair or upgrade of the front suspension area in your BMW and need other elements from the same group, such as additional steering knuckles, hubs, or related mounts, check the available parts in the BMW Steering Knuckles category.

For drivers interested in a broader perspective on the cost-effectiveness of using aftermarket components, including those for other brands, an article describing the durability and application of used components may be helpful – you can find it here: Volkswagen – solidity and reliability. Why are used VW parts a reasonable choice?.