Audi A6 C6 Rear Steering Knuckle Right O/S Crossover Wheel Hub 4F0505434G

Audi A6 C6 Rear Steering Knuckle Right O/S Crossover Wheel Hub is a steering system component from the Steering Knuckles group, designed for the rear, right side of the suspension. It ensures precise wheel guidance, stable hub seating, and proper cooperation with other suspension components in Audi vehicles.

Specifications and technical data

• SKU: 4F0505434G
• Mark: Audi
• Condition: Used
• OEM Part Number: 4F0505434G
• Substitutable numbers: 4F0505434G, 4F0 505 434 G
• Location on the vehicle: Rear, Right
• Category: Steering Knuckles

Purpose and function in the suspension

The steering knuckle with wheel hub for the rear, right side is responsible for the stable connection of the hub to the control arms and mounting elements, as well as for maintaining the correct suspension geometry. In the Audi A6 C6 Allroad vehicle, this component operates under demanding conditions, transferring vertical, lateral, and longitudinal loads, which is why its correct selection is crucial for safety and predictable vehicle handling.

A properly selected steering knuckle with hub allows for maintaining correct wheel camber and toe angles, which translates into even tire wear, stability at higher speeds, and confident vehicle behavior during braking and cornering.

Benefits of using an original Audi steering knuckle

The component from this group, originating from the Audi brand, ensures:

• factory fitment to the suspension design of the specific model,
• proper cooperation with the wheel hub and other steering system components,
• preservation of the stiffness and suspension operating characteristics designed by the manufacturer,
• the ability to restore original geometry parameters after repair or collision.

Thanks to this, replacing a damaged steering knuckle with the correct part allows for restoring handling stability and predictable vehicle response, which is particularly important in Audi A6 C6 Allroad class vehicles, often operated in diverse road conditions.

Installation characteristics and application

The steering knuckle with wheel hub is intended for installation on the rear, right side of the vehicle. It is responsible for the proper seating of the hub, cooperation with the bearings, and suspension mounting elements. Replacement of this component is recommended in case of mechanical damage, deformation after a collision, or excessive wear, which may affect geometry and driving comfort.

Selecting a steering knuckle compatible with the Audi design reduces the need for additional modifications, facilitates installation, and shortens repair time, which is beneficial for both the workshop and the vehicle user.

Product condition and utility aspects

The offered steering knuckle with wheel hub is in Used condition, meaning it comes from disassembly and has been previously operated. Such components are often chosen as an economical solution, allowing for the restoration of the steering system's efficiency while maintaining a favorable cost-to-quality ratio. Before installation, standard workshop verification is recommended, including inspection of mounting surfaces and mating components.

If you are considering a choice between a new and a used part and want to better understand the cost and quality differences, the following guide article may be helpful: New or used? A comparison of costs and quality of car parts.

Expanding repairs within Audi steering knuckles

If you are planning a comprehensive repair or upgrade of the suspension zone in your Audi and need other elements from the same group, such as additional steering knuckles, mounts, or related structural components, check the available parts in the Audi Steering Knuckles category.