Shock Absorber BMW F45 F46 Suspension Spring Strut Rear Left Right N/O/S 6887330

Shock Absorber BMW F45 F46 Suspension Spring Strut Rear Left Right is an original component from the Shock absorbers and struts group, designed for the rear axle of BMW F45/F46 series vehicles. Thanks to its factory design, it ensures consistent suspension behavior, body stability, and predictable damping characteristics while driving.

Specifications and technical data

• SKU: 6887330
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 6887330
• Substitutable numbers: 6887330, 33506887330, 6874465, 33526874465
• Location on the vehicle: Rear, Right, Left
• Category: Shocks, Struts & Assemblies

Purpose and vehicle placement

The presented shock absorber is designed for installation on the rear axle of the vehicle and can be used on both the left and right sides. This solution facilitates part selection during suspension service and allows for maintaining consistent performance parameters on both sides of the car.

The component belongs to the Shock absorbers and struts category, which is responsible for controlling body movement, reducing roll, and improving traction during acceleration, braking, and driving over uneven surfaces.

Technical and functional characteristics

The shock absorber operates in the suspension system as a key vibration-damping element, working in conjunction with the spring and other rear suspension components. Properly selected damping characteristics allow for:

• maintaining stable contact between the wheels and the road surface,
• reducing body roll under load,
• increasing the predictability of the car's behavior in corners,
• reducing the transmission of vibrations to the passenger cabin.

Thanks to the use of the original BMW design, compatibility with factory mounting points and standard suspension geometry is maintained, which facilitates installation and subsequent chassis adjustment.

Original origin and condition of the element

The shock absorber comes from the BMW line, which means it complies with the manufacturer's factory design standards. This is a used part, which allows for an economical replacement while maintaining the original design specifications. This type of solution is often chosen for servicing daily-driven cars, where a reasonable balance between cost and suspension performance is important.

Use in suspension service and upgrades

Replacing the rear shock absorber in a BMW F45/F46 is recommended in case of reduced driving comfort, increased braking distance, excessive body roll, or uneven tire wear. Using an original element from the Shock absorbers and struts category helps restore predictable vehicle handling and improve safety in daily operation.

If you are planning a comprehensive repair or upgrade of the rear suspension area in your BMW and need other elements from the same group, such as additional shock absorbers, complete struts, or mounting brackets, check the available parts in the BMW Shock absorbers and struts category.

Technical support and shock absorber selection

When selecting a shock absorber for a specific version of the BMW F45/F46, it is worth paying attention to compatibility with the suspension system and vehicle configuration. Using the OEM part number and interchangeable numbers can be helpful, as they allow for precise component identification in service catalogs.

To better understand the role of shock absorbers in the entire chassis system and the relationships between them and control arms and stabilizers, it is worth reading our guide: Suspension system – a comprehensive guide to shock absorbers, control arms, and stabilizers. This will make it easier to assess when replacing a single element is sufficient and when it is worth considering a wider range of service work.

Summary

Shock Absorber BMW F45 F46 Suspension Spring Strut Rear Left Right is an original component from the suspension group, designed for installation on the rear axle on both sides of the vehicle. It ensures consistent chassis performance, improves stability and driving comfort, and helps maintain the factory handling characteristics typical of BMW. Choosing this solution is a reasonable way to restore proper suspension operation without sacrificing the manufacturer's original design.