Ford Ranger Wildtrak Mk6 Front Propshaft 3.2 TDCI Manual EB3G-4A376-CA

Ford Ranger Wildtrak Mk6 Front Propshaft 3.2 TDCI Manual is a front driveshaft from the Cardan Joints category, designed for the Ford Ranger Wildtrak version with a manual gearbox. This component is responsible for the stable transfer of torque to the front axle, which is crucial for traction, 4x4 operation, and safe vehicle use both off-road and on asphalt.

Specifications and technical data

• SKU: EB3G-4A376-CA
• Mark: Ford
• Condition: Used
• OEM Part Number: EB3G-4A376-CA
• Substitutable numbers: EB3G-4A376-CA, EB3G4A376CA, 2474857, JB3G-4A376-DC, JB3G4A376DC
• Location on the vehicle: Front
• Gearbox type: Manual
• Part type: Propshaft
• Category: Propshafts

Application in Ford Ranger Wildtrak Mk6

The front driveshaft in the Ford Ranger Wildtrak Mk6 works with the four-wheel-drive system, ensuring a smooth connection between the gearbox and the front axle. The version dedicated to the 3.2 TDCI engine with a manual transmission is structurally adapted to the chassis geometry of this model, allowing for the maintenance of the correct drivetrain line and reduction of vibrations during driving.

Thanks to the use of universal joints from the Cardan Joints family, the shaft compensates for changes in suspension and drivetrain angles, which is particularly important for vehicles used with loads, off-road, and during towing.

Technical Characteristics and Compatibility

The presented front shaft is intended for front installation in the vehicle, in a configuration with a manual gearbox. Proper adaptation to the specific engine and drivetrain version of the Ford Ranger Wildtrak Mk6 minimizes the risk of installation problems and eliminates the need for drivetrain modifications.

The component has an assigned OEM part number and related replacement numbers, which facilitates verification of compatibility with a specific vehicle configuration. When selecting a shaft, it is advisable to compare these designations with the service documentation or the numbers found on the currently installed component to ensure full compatibility.

Benefits of Using an Original Shaft with Cardan Joints

Choosing the right driveshaft with Cardan joints for the Ford Ranger Wildtrak Mk6 translates into a number of practical operational benefits:

• stable transfer of torque to the front axle in 4x4 mode,
• reduction of vibrations and noise in the cabin due to correct geometry and balancing,
• proper cooperation with the suspension under variable loads and off-road conditions,
• reduced risk of damage to other drivetrain components with correct installation.

A used original Ford part is a sensible choice for users who expect a construction consistent with factory specifications, while maintaining a favorable cost-to-functionality ratio.

Condition, Installation, and Service Recommendations

The driveshaft offered in this configuration is a used part, which allows for a lower repair cost while maintaining the original manufacturer's specifications. Before installation, a standard inspection of cooperating elements is recommended, such as mounts, supports, seals, and the condition of flanges in the gearbox and front axle.

During installation, pay attention to:

• correct alignment of the shaft with mounting marks,
• bolt tightening torque in accordance with Ford's service documentation,
• checking for play in the Cardan joints after installation,
• re-verification after a short test run (checking for any vibrations or unusual noises).

Other Ford Cardan Joints – Drivetrain Upgrade and Service

If you are looking for other components from the Cardan Joints category dedicated to Ford vehicles, check out the Ford Cardan Joints available in our store to comprehensively care for your car's drivetrain.

More on Upgrades and Driving Comfort

If you are planning more extensive work on your car – not only in the drivetrain area but also the interior – it is worth familiarizing yourself with the guide on cabin personalization. Practical tips can be found in the article Car Interior Tuning with Global Parts, which shows how to use used components to improve the ergonomics and appearance of the vehicle.