Ford Transit Connect Mk2 Side Wing Mirror Base Carrier Left N/S DT11-17683-FE

Ford Transit Connect Mk2 Side Wing Mirror Base Carrier Left N/S is an original component from the Exterior mirrors group, designed for installation on the driver's side. The carrier serves as the structural base for the complete mirror, ensuring stable mounting to the door and correct alignment of the mirror assembly relative to the vehicle body.

Specifications and technical data

• SKU: RHD-2039619-1
• Mark: Ford
• Condition: Used
• OEM Part Number: 2039619
• Substitutable numbers: 2039619, DT11-17683-FE, DT1117683FE
• Location on the vehicle: Left
• Part type: Standard Mirror Assembly
• Category: Mirror Assemblies

Purpose and function of the component

The presented mirror base carrier has been designed specifically for the second-generation Transit Connect model, taking into account the door geometry and factory mounting points. The placement on the left side of the vehicle means that the part works with the driver's side mirror, being responsible for its proper seating, rigidity, and resistance to vibrations.

The component plays a key structural role: it transfers loads from wind, vibrations, and mirror movement, while simultaneously stabilizing the entire housing against the door panel. A correctly selected carrier reduces the risk of looseness, rattling, and improper adhesion of the mirror to the bodywork.

Benefits of using an original mirror carrier

Using an original carrier in a Ford vehicle ensures:

• Factory fitment to the shape of the door and sheet metal pressings, without the need for modifications.
• Proper positioning of the mirror relative to the driver's field of vision, in accordance with the manufacturer's specifications.
• Stable mounting that reduces mirror vibration at higher speeds.
• Consistency with other components of the exterior mirror system (housing, glass, adjustment mechanism).

As a part from the Exterior mirrors group, the carrier is important not only from the point of view of comfort but also safety – the quality of the image in the mirror and the resistance of the entire assembly to operational damage depend on its rigidity and correct installation.

Installation characteristics and application

The carrier is intended for installation in factory mounting points in the door, which facilitates service work and shortens replacement time. The design intended for a specific side of the vehicle eliminates the risk of error when selecting parts and ensures compliance with the body line.

The component will work well both for typical post-accident repairs and for replacing a worn or damaged carrier that causes mirror looseness, improper adhesion to the door, or adjustment problems. The used component allows for economical repair while maintaining the original geometry and performance standard provided by the vehicle manufacturer.

Condition and quality of the component

The offered carrier comes from dismantling and is classified as a used part, which means it may show signs of previous use, but it retains the functionality required for further use. This type of solution is cost-effective while allowing for consistency with the factory mirror construction.

For fleet, delivery, and commercial vehicles such as the Transit Connect, using a used, original carrier is often a reasonable compromise between price and quality, especially for routine and restoration repairs.

Expansion of the mirror system in a Ford

If you are planning a comprehensive repair or upgrade of the side visibility zone in your Ford and need other elements from the same group, such as housings, glass, or complete mirror assemblies, check the available parts in the Ford Exterior mirrors category.

Additional tips on selecting original, used components by catalog numbers and by the vehicle identification number can be found in the article: Audi five-cylinder engine – a legend from Quattro to RS3 and how to take care of it with original Audi parts, where practical rules for verifying OEM part compatibility are discussed.