BMW X3 E83 Suspension Coil Spring Set Rear Axle Left Right N/O/S 3413185

Visual condition of the part

The product shows signs of use visible in the photos. BMW X3 E83 Suspension Coil Spring Set Rear Axle Left Right N/O/S is an original component from the Leaf springs and coil springs group, designed for operation on the left and right sides of the rear axle. This solution was created to maintain the factory handling characteristics, stability, and ride comfort of the first-generation BMW X3.

Specifications and technical data

• SKU: 3413185
• Mark: BMW (Genuine OE)
• Condition: Used
• OEM Part Number: 3413185
• Substitutable numbers: 3413185, 33533413185
• Location on the vehicle: Rear, Right, Left
• Part type: Coil Spring
• Category: Leaf & Coil Springs

Purpose and function in the BMW X3 E83 suspension

The presented set of springs has been designed specifically for the rear axle of the BMW X3 E83, taking into account operation on both the left and right sides. It is responsible for maintaining the correct vehicle ride height, stabilizing the vehicle under load, and ensuring predictable vehicle behavior during braking, acceleration, and cornering. Thanks to being tailored to the specific BMW model, the springs work in harmony with factory shock absorbers and other suspension components, which allows for maintaining consistent driving characteristics and reducing the risk of improper force distribution on the rear axle.

Construction and fitment for the rear axle

The set includes components intended for installation on both sides of the rear axle, which facilitates simultaneous replacement and maintains suspension symmetry. The design of the springs is adapted to the suspension geometry of the BMW X3 E83, allowing for precise seating in the mounts and proper interaction with cushions and bump stops. Such fitment translates into:

• stable body support under various loads in the trunk and rear seats,
• more predictable vehicle reactions to road irregularities,
• reduction of body roll under typical road conditions.

Benefits of using original BMW springs

Using the original rear suspension spring set in the BMW X3 E83 allows for maintaining driving parameters in accordance with the manufacturer's specifications. This is particularly important in all-wheel-drive vehicles, where even force distribution along the axle affects the operation of traction and stability control systems. Key advantages include:

• factory fitment for the BMW X3 E83 model – without the need to modify other suspension components,
• consistent operating characteristics of the left and right sides of the rear axle,
• maintaining the proper vehicle ride height within the range specified by the manufacturer.

Use in service and post-accident repairs

The rear suspension spring set is suitable for both standard service maintenance and repairs following mechanical damage or wear of suspension components. Replacing a pair of springs on an axle helps to minimize differences in deflection and ensures uniform suspension operation on both sides of the vehicle. In the case of post-accident repairs or comprehensive suspension restoration, it is worth considering the selection of other rear axle components to maintain parameter consistency and avoid unwanted changes in geometry.

Expanding the scope of repairs and additional information

If you are planning a comprehensive repair or upgrade of the rear axle suspension area in your BMW and need other elements from the same group, such as additional springs, leaf springs, or components working with springs, check the available parts in the BMW Leaf springs and coil springs category. If you are preparing a broader post-collision repair and want to combine safety with cost control, a guide describing the use of original used components may be helpful – you can find more information in the article Repairing a car after a collision using original used parts.