Ford Transit Connect Mk2 Rear Axle Suspension Coil Spring Set x2 DV61-5560-EC

Visual condition of the part

The product shows signs of use visible in the photos. Ford Transit Connect Mk2 Rear Axle Suspension Coil Spring Set is an original component from the Leaf springs and coil springs group, designed for operation on the vehicle's rear axle. The set of two springs ensures consistent, predictable suspension behavior, which translates into vehicle stability under load and safe handling during daily operation.

Specifications and technical data

• SKU: 1808626
• Mark: Ford
• Condition: Used
• OEM Part Number: 1808626
• Substitutable numbers: DV61-5560-EC, DV615560EC, 1808626
• Location on the vehicle: Rear
• Part type: Coil Spring Set
• Category: Leaf & Coil Springs

Purpose and function in the suspension

The presented set has been designed specifically for the rear suspension of the Ford Transit Connect Mk2, where it is responsible for maintaining the correct vehicle ride height and controlling deflection under load. Using two matched springs in one set allows for maintaining uniform operating characteristics on both sides of the axle, which reduces body roll and improves the predictability of the vehicle's response. The original Ford origin means compliance with the vehicle's factory design assumptions, including suspension geometry, shock absorber operating range, and spring parameters intended for this commercial model.

Benefits of using original rear axle springs

Using a dedicated rear suspension spring set in the Ford Transit Connect Mk2 provides a number of practical technical benefits:

• maintaining the correct body position with typical loads carried by the vehicle,
• consistent operation of both sides of the suspension thanks to replacement as a set,
• preservation of factory spring characteristics and ride comfort,
• better stability during braking and cornering. For a commercial vehicle such as the Transit Connect, properly selected rear axle springs are essential for the safety of the transported cargo and the durability of other suspension components.

Condition, fitment, and installation

The item comes from the group of original Ford parts and is offered as a set of two springs intended for the rear axle. Such a set facilitates service, as the mechanic immediately has a pair of components with the same characteristics, which is recommended when working on the suspension. The springs are prepared for installation in place of the factory elements, without the need for suspension structure modifications. As a result, the replacement follows standard workshop procedures, and the vehicle retains the parameters specified by the manufacturer.

Practical application and operational aspects

The rear suspension coil spring set will perform well both in typical urban use and in intensive commercial use, where frequent load changes require stable rear axle operation. Replacing worn springs with an original set helps to reduce phenomena such as excessive rear-end "sagging," uneven tire wear, or reduced braking efficiency when fully loaded. If you are planning a comprehensive repair or upgrade of the rear axle suspension zone in your Ford and need other elements from the same group, such as additional springs, leaf springs, or spring-assist elements, check the available parts in the Ford leaf springs and coil springs category.

Ecological aspect and sustainable operation

Choosing original used suspension components is not only a technically sound solution but also a way to take a more responsible approach to vehicle operation. Reusing proven components reduces the demand for the production of new parts, which translates into lower consumption of raw materials and energy. If you want to better understand how such decisions affect the environment and the total vehicle life cycle, it is worth reading the article: Sustainable automotive: How purchasing original used parts reduces the carbon footprint and protects the environment?.