Audi A6 C7 2.0 TDI Engine Mount Bracket Holder Right O/S 8R0199381B

Audi A6 C7 2.0 TDI Engine Mount Bracket Holder Right O/S is a precisely engineered structural component that stabilizes the powertrain on the passenger side. Thanks to its factory-spec geometry and perfect fit for the Audi chassis, this specialized bracket ensures proper load transfer from the engine to the chassis and reduces unwanted vibrations in the engine bay.

Specifications and technical data

• SKU: 8R0199381B
• Mark: Audi
• Condition: Used
• OEM Part Number: 8R0199381B
• Substitutable numbers: 8R0199381B, 8R0 199 381 B
• Location on the vehicle: Right
• Fuel type: Petrol
• Category: Engine Mounts

Purpose and function in the engine mounting system

The presented bracket is a component from the Engine mounts group, responsible for a rigid yet controlled connection between the right side of the powertrain and the chassis structure. In combination with the correct engine mount, it stabilizes the position of the powertrain, contributing to:

• reduction of vibrations transmitted to the cabin,
• proper operation of the drivetrain during acceleration and engine braking,
• maintaining the correct geometry of the powertrain relative to the drive shafts and steering gear.

The component is designed for installation on the right side of the vehicle and is compatible with the engine type specified, which is crucial for its shape, mounting point spacing, and the loads it carries.

Audi compatibility and mounting fitment

The bracket was developed by Audi as part of the original engine mounting architecture for the A6 C7 generation model. This means that it:

• fits factory mounting points on the chassis and engine block,
• requires no modifications or structural adaptations when paired with the correct engine and mount,
• maintains compliance with factory tolerances, which reduces the risk of stress and cracks in the mounting zone.

Such fitment is particularly important in front-wheel drive or quattro vehicles, where improper engine positioning can affect the operation of drive shafts, joints, and overall ride comfort.

Characteristics of the used component

The offered engine mount bracket is a used part, sourced from vehicle dismantling. For this type of component, it is crucial to ensure:

• no cracks or deformations in load-bearing areas,
• undamaged contact surfaces for the chassis and engine,
• stable threads for mounting bolts.

In practice, using an original, pre-owned bracket often allows for maintaining factory-level fitment quality at a lower cost than a new aftermarket replacement of unknown origin.

Benefits of using an original engine mount bracket

Replacing a damaged or corroded bracket with an original Audi component provides tangible operational benefits:

• More stable powertrain operation – reduction of excessive engine movement during load changes.
• Improved ride comfort – less vibration and noise transmitted to the vehicle interior when paired with a properly functioning mount.
• Protection of other drivetrain components – correct engine positioning reduces stress on drive shafts, joints, and exhaust elements.

For workshops and private users, this means more predictable vehicle behavior and a lower risk of secondary failures resulting from improper engine mounting.

Technical support and additional materials

If you are planning a comprehensive repair or upgrade of the engine area in your Audi and need other components from the same group, such as additional brackets, supports, or compatible mounting hardware, check out the available parts in the Audi engine mounts category.

When selecting used components for the drivetrain and electronics, it is worth following proven procedures and practical knowledge – the article describing when it is worth choosing second-hand parts, available here, may be helpful: The second life of electronics – when is it worth choosing used controllers and modules.