Audi A1 8X 1.4 TFSI Engine Mount Support Holder Right Side O/S 6C0199167C

Audi A1 8X 1.4 TFSI Engine Mount Support Holder Right Side O/S is an original structural component designed to provide stable support for the powertrain on the passenger side. As part of the Engine mounts group, it is responsible for transferring loads from the engine to the chassis and reducing vibrations and noise. Using an OEM component allows for a technically correct repair without interfering with the factory mounting geometry.

Specifications and technical data

• SKU: 6C0199167C
• Mark: Audi
• Condition: Used
• OEM Part Number: 6C0199167C
• Substitutable numbers: 6C0199167C, 6C0 199 167 C, 600199262AT
• Location on the vehicle: Right
• Fuel type: Diesel
• Category: Engine Mounts

Purpose and function in the powertrain

The presented holder is designed to operate on the right side of the engine bay, where it works in conjunction with the engine mount and other powertrain support points. It is responsible for:

• precise positioning of the engine relative to the chassis,
• safe transfer of static and dynamic loads,
• maintaining the correct geometry of the powertrain during acceleration and braking,
• reducing the transmission of vibrations to the body and the vehicle interior.

Thanks to its compatibility with diesel units, it ensures appropriate rigidity and resistance to the vibrational loads characteristic of diesel engines.

Benefits of using an original holder

Using an original engine mount support holder in an Audi A1 8X provides a number of practical operational benefits:

• Factory mounting geometry – maintaining the correct alignment of the engine relative to the half-shafts, exhaust, and other auxiliary components.
• Compatibility with factory mounting points – no need for modifications, drilling, or adjustments.
• Stable powertrain operation – reduction of knocking, jerking, and excessive unit movement during load changes.
• Improved driving comfort – reduction of vibrations transmitted to the cabin, especially noticeable at idle and low speeds.

Choosing a used OEM component is a reasonable compromise between repair costs and maintaining original fitment quality.

Selection and installation of the engine mount holder

To ensure proper system operation, the holder should always be selected for the specific engine version and mounting side. In practice, this means verifying:

• compatibility with the diesel engine used in the vehicle,
• placement on the vehicle on the right side,
• compatibility with the design of the engine mount used.

Professional installation involves properly supporting the powertrain, removing the old holder, cleaning the mounting points, and tightening the bolts while maintaining the correct sequence and torque specifications. This helps avoid stress in the mounts and unwanted vibrations after the repair.

Engine zone and related Audi components

If you are planning a comprehensive repair or upgrade of the engine area in your Audi and need other elements from the same group, such as additional holders, brackets, or other powertrain mounts, check the available parts in the Audi engine mounts category.

When planning work in the powertrain zone, it is also worth paying attention to the condition of the control electronics and engine accessories – helpful tips on choosing used electronic components can be found in the article Second life for electronics – when is it worth choosing used engine controllers, comfort modules, and parking sensors?.

Summary

The Audi A1 8X 1.4 TFSI Engine Mount Support Holder Right Side O/S is a technically essential element of the powertrain support system, dedicated to working with diesel engines. It ensures stable engine seating, correct powertrain geometry, and reduced vibrations transmitted to the chassis. Choosing an original, used component allows for a cost-effective repair while maintaining factory fitment and predictable vehicle behavior after installation.