Ford Transit Mount Mounting Bearing Holder 2.2 TDCI Diesel Engine 4C116A002AE

Ford Transit Mount Mounting Bearing Holder 2.2 TDCI Diesel Engine is an original component from the Engine mounts group, designed for Ford diesel units. It provides stable support for the powertrain, reduces vibration transmission to the chassis, and improves the operating comfort of the diesel engine.

Specifications and technical data

• SKU: 4C116A002AE
• Mark: Ford
• Condition: Used
• OEM Part Number: 4C116A002AE
• Substitutable numbers: 4C116A002AE, 4C11 6A002 AE
• Fuel type: Diesel
• Category: Engine Mounts

Purpose and function in the powertrain

The engine mount in the Transit 2.2 TDCI model is responsible for the flexible mounting of the powertrain to the chassis. In the case of diesel engines, which generate higher torsional vibrations, a properly selected mount is crucial for:

• reducing vibrations felt in the driver's cabin,
• stabilizing the engine position during acceleration and engine braking,
• protecting other auxiliary components (hoses, wiring harnesses, mounts) from excessive stress,
• maintaining the correct geometry of the powertrain relative to the gearbox and drive shafts.

A well-selected engine mount in a Transit with a diesel unit translates into smoother powertrain operation, less noise in the cabin, and more predictable vehicle behavior under load.

Benefits of using an original Ford mount

The original Ford engine mount has been designed specifically for the loads and operating characteristics of the 2.2 TDCI unit. As a result, it ensures:

• precise fitment to factory mounting points without the need for modifications,
• preservation of factory vibration damping characteristics,
• consistency with other components of the powertrain mounting system,
• stable engine support under the typical operating conditions of a commercial Transit.

Choosing an original solution is particularly important in commercial vehicles, where predictable vehicle behavior under load and the reduction of unplanned service downtime are essential.

Product characteristics and installation

The engine mount is designed to work with a diesel unit, meaning its construction has been adapted to the specific vibrations and loads generated by a diesel engine. This component works in a system with other mounts, creating a complete powertrain mounting system.

When replacing, it is recommended to:

• check the condition of the remaining engine and gearbox mounts,
• verify the geometry of the mounts and any potential play,
• thoroughly clean the contact surfaces before installation,
• use tightening torques in accordance with Ford service documentation.

Performing the replacement in this manner allows for full utilization of the mount's damping properties and reduces the risk of premature wear of other system components.

Why consider a used OEM part

A used Ford engine mount with preserved geometry and proper stiffness can be a reasonable choice for vehicles used intensively, where the cost-to-effect ratio is important. An original OEM component retains factory design parameters, which facilitates installation and minimizes the risk of fitment issues.

If you want to better understand when a used original part is more beneficial than a replacement, this practical guide may be helpful: 5 reasons why a used OEM part is a better choice than a replacement.

Related components and further system expansion

If you are planning a comprehensive repair or upgrade of the engine area in your Ford and need other components from the same group, such as additional mounts, brackets, or further powertrain support points, check the available parts in the Ford engine mounts category.

When working on the powertrain, it is also worth taking care of the condition of the engine itself. If you are considering purchasing a used powertrain, this step-by-step guide will be helpful: How to buy a used car engine and avoid a bad deal – a step-by-step guide.