Ford Focus Mk2 Gearbox Support Mount Bracket Holder 3M51-7M125-CE

Ford Focus Mk2 Gearbox Support Mount Bracket Holder is a factory mounting component from the Engine mounts group, designed to work with a specific type of gearbox. It provides stable support for the powertrain, limits unwanted vibrations, and maintains the correct geometry of the drivetrain in the Ford Focus Mk2. This is a practical solution for users looking for a proven, original component for repairing or replacing the gearbox mount.

Specifications and technical data

• SKU: 3M51-7M125-CE
• Mark: Ford
• Condition: Used
• OEM Part Number: 3M51-7M125-CE
• Substitutable numbers: 3M51-7M125-CE, 3M517M125CE
• Gearbox type: Manual
• Category: Engine Mounts

Purpose and function in the drivetrain

The Gearbox Support Mount Bracket Holder in the Ford Focus Mk2 operates in the area where the engine connects to the gearbox, transferring loads from the powertrain to the chassis. It is responsible for:

• maintaining a stable position of the gearbox relative to the engine and subframe,
• limiting powertrain movement during acceleration and engine braking,
• working with other components in the Engine mounts group to reduce vibration and noise in the cabin.

Selecting the correct support bracket is particularly important for a specific gearbox type, as the mounting geometry and support points are strictly matched to the design of the given powertrain variant.

Compatibility with manual transmission

The presented bracket has been designed for use with a manual transmission, which means it features appropriately selected geometry, mounting hole spacing, and load-bearing characteristics. In practice, this translates to:

• proper torque transfer without excessive stress on the gearbox housing,
• stable powertrain guidance during gear changes,
• reduced risk of unwanted play and knocking in the transmission area.

Thanks to its compatibility with the manual transmission, this component helps maintain the factory driving characteristics and powertrain refinement.

Component characteristics and benefits

The gearbox support bracket from this offer comes from a Ford vehicle, which ensures compatibility with factory mounting points and design parameters. Using an original solution from the Engine mounts group allows you to:

• maintain the correct alignment of the powertrain relative to the body,
• reduce the transmission of vibrations to the chassis and vehicle interior,
• limit the wear of other engine and gearbox mounting components.

This is particularly beneficial for maintenance repairs when you want to preserve the factory operating characteristics without the need for structural modifications.

Condition, origin, and service application

The offered component is marked as used, which in practice means it has been removed from a vehicle and verified for further installation suitability. This type of part is a good choice for:

• repairs following mechanical damage in the gearbox area,
• replacing a worn or deformed bracket,
• restoring the factory mounting system after previous non-original modifications.

Due to the preservation of the original geometry, installation proceeds in a manner similar to the factory process, without the need for adjusting holes or using additional adapters.

Support with selection and additional materials

If you are planning a comprehensive repair or upgrade of the engine and gearbox area in your Ford and need other components from the same group, such as additional mounts, brackets, or vibration-damping elements, check the available parts in the Ford Engine mounts category.

When planning broader service work, it is also worth checking out technical materials regarding the operation of diesel units and their accessories – the article Second life of the Mercedes OM642 engine – how injectors and turbochargers restore the power of the 3.0 V6 CDI may be helpful, as it discusses the approach to refreshing key components and can serve as a reference point when planning your own repairs.