Land Rover Discovery 4 L319 Rear Axle Driveshaft Right O/S 5H22-4B457-EC

Land Rover Discovery 4 L319 Rear Axle Driveshaft Right O/S is an original drivetrain component designed for the rear axle on the passenger side. Thanks to its factory design, Land Rover ensures precise fitment, correct operating geometry, and stable torque transmission in demanding off-road and on-road conditions.

Specifications and technical data

• SKU: LR071933
• Mark: Land Rover
• Condition: Used
• OEM Part Number: LR071933
• Substitutable numbers: LR071933, 5H22-4B457-EC, 5H224B457EC
• Location on the vehicle: Rear, Right
• Part type: Driveshaft
• Category: Driveshafts

Purpose and vehicle placement

The presented driveshaft is dedicated to the rear axle, on the right side of the vehicle. Such precise vehicle placement guarantees compatibility with the factory suspension and drivetrain system in the Land Rover Discovery 4 L319, minimizing the risk of vibrations, noise, or accelerated wear of mating components.

By maintaining the original geometry, the shaft works with the rear differential and wheel hub in a predictable manner, which translates into handling stability, correct operation of traction systems, and driving comfort both on asphalt and in light terrain.

Technical characteristics and compatibility

The driveshaft from the Driveshafts category was designed by the vehicle manufacturer for operation in a 4x4 system, where uniform load transmission and resistance to variable operating conditions are crucial. The component's construction is optimized for:

• stable torque transmission to the rear right wheel,
• operation at variable angles resulting from suspension travel,
• maintaining seal integrity and protecting joints from contamination.

The original Land Rover origin means that the shaft was manufactured according to factory tolerances, which facilitates installation and reduces the need for additional modifications or adjustments.

Condition of the component and benefits of choosing a used part

The offered driveshaft is a used component, which allows for an economical repair of the drivetrain while maintaining original construction quality. Choosing a used OEM component is often a sensible alternative to replacements of unknown origin, especially in off-road vehicles and SUVs, where the drivetrain operates under higher loads.

By using an original driveshaft, you reduce the risk of problems with improper balancing, mismatched splines, or differences in length that may occur with unverified parts. This translates into more reliable operation and a lower risk of secondary failures within the suspension and drivetrain.

Professional installation and operation

To fully utilize the potential of this component, installation in a specialized service center is recommended, which will ensure proper tightening of connections, inspection of clearances, and verification of mating components. A correctly installed driveshaft supports:

• smooth acceleration without jerking,
• reduction of vibrations transmitted to the body,
• stable operation of the 4x4 system in various driving modes.

For additional support in diagnosing the drivetrain and selecting mating components, it is worth checking the guide Clutch and dual-mass flywheel – diagnostics and selection of drivetrain parts, which discusses practical aspects of drivetrain operation, including in four-wheel-drive vehicles.

Expanding the Land Rover drivetrain

If you are planning a comprehensive repair or modernization of the drivetrain area in your Land Rover and need other components from the same group, such as other shafts, half-shafts, or drivetrain elements, check the available parts in the Land Rover Driveshafts category.