Volkswagen Passat B7 Front Axle Driveshaft Right O/S 2.0 TDI 5Q0407272BM

Volkswagen Passat B7 Front Axle Driveshaft Right O/S 2.0 TDI is an original drivetrain component designed for the petrol engine version. Thanks to its factory-standard construction, Volkswagen ensures precise fitment to the steering knuckle, wheel hub, and gearbox, which facilitates installation and helps maintain the correct geometry of the front axle. This used component from the Driveshaft category is a sensible choice for professional repairs or replacing a damaged passenger-side CV joint.

Specifications and technical data

• SKU: 5Q0407272BM
• Mark: Volkswagen
• Condition: Used
• OEM Part Number: 5Q0407272BM
• Substitutable numbers: 5Q0407272BM, 5Q0 407 272 BM
• Location on the vehicle: Front, Right
• Fuel type: Petrol
• Category: Driveshafts

Purpose and fitment for the Passat B7

The presented driveshaft is designed to operate on the front right side of the vehicle, i.e., the passenger side. It is a key component connecting the gearbox to the wheel hub, responsible for transferring torque to the wheel while maintaining full mobility of the suspension and steering system. The construction dedicated to the Volkswagen Passat B7 allows for maintaining factory handling parameters, stability at higher speeds, and proper cooperation with safety systems such as ABS or ESP.

Construction and technical characteristics

The driveshaft consists of an outer and inner half-shaft, CV joints, and rubber boots, forming a complete working assembly for the right side of the front axle. The geometry and length of the half-shaft are adapted to the specific suspension architecture of the Passat B7, which minimizes the risk of vibrations, knocking, and uneven tire wear. The component is adapted for use with a petrol engine, which is significant due to different dynamic loads compared to diesel units.

Application in the drivetrain

A functional driveshaft on the right side has a direct impact on driving comfort and safety. Replacing a worn component is recommended in the case of:

• noticeable vibrations on the steering wheel or body during acceleration,
• knocking when turning the wheels or starting off,
• damage to CV joint boots and grease leakage,
• excessive play in the joints.

Choosing an original Volkswagen driveshaft allows you to reduce the risk of problems with alignment, leaks, or accelerated wear of the joints, which may occur with parts of uncertain origin. This solution is particularly recommended for repairs performed in workshops specializing in the Volkswagen brand, where repeatability and predictability of operating parameters are essential.

Condition, verification, and installation

The offered driveshaft is a used component, which in practice means a favorable compromise between the cost of repair and maintaining factory build quality. Before installation, a standard workshop procedure is recommended, including checking the play of the joints, the condition of the boots, and the mounting sockets. A correctly selected and installed driveshaft reduces the loads transferred to the gearbox and wheel bearings, which translates into a longer service life of the entire drivetrain.

Technical support and selection of drivetrain components

For comprehensive drivetrain maintenance – especially when you are servicing the clutch, dual-mass flywheel, or other elements in parallel – it is worth using expert knowledge. Practical tips on diagnostics and component selection can be found in the article: Clutch and dual-mass flywheel – diagnostics and selection of drivetrain parts, which discusses, among other things, the cooperation of drivetrain elements in various configurations.

If you are planning a comprehensive repair or upgrade of the front axle drivetrain area in your Volkswagen and need other elements from the same group, such as half-shafts, joints, or complete drive assemblies, check the available parts in the Volkswagen Driveshafts category.